Ready, steady… save!
You don’t need a chart to join in. Here are 2 ways to record your savings:
1. Cross it off
Pop a chart into your first post. Saved an amount? Cross it out! Read more »
£0.01 £0.02 £0.03
2. Write it down
Skip the chart and add updates to your first post. Read more »
“Another +£3 saved today. Go me!”
Use +£ before each new saving so it counts towards your total.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
Worcester/Bosch Greenstar 34CDi Classic boiler
maggiesoup1
Posts: 186 Forumite
in Energy
Wonder if anyone has one of these boilers? Got mine installed a week ago and can't get my head round programming the daily timings for the RT500.
I've followed the instructions at the side of the wireless control box, looked at something from a plumbing company on YouTube but to no avail. The heating is is coming on (a) during the night and (b) at times I've set it for going off?
I bought the boiler to help reduce my gas bills but at this rate they'll be double!!!! Help!!!!
I've followed the instructions at the side of the wireless control box, looked at something from a plumbing company on YouTube but to no avail. The heating is is coming on (a) during the night and (b) at times I've set it for going off?
I bought the boiler to help reduce my gas bills but at this rate they'll be double!!!! Help!!!!
0
Comments
-
Is this a Salus RT500 programable stat?
see a simple guide to programing here
http://www.salus-tech.com/cache/filelibrary/2030/library/fileLibrary/2013/7/RT500---RT500RF-Easy-Guide-006-1.pdf
Basically to need to program the temperatures that you require on different days at different times of those days.
It's not a case of on/off, the boiler will only fire up if the temperature set for that time on that day requires heat from the boiler to achieve the temperature that you have programmed.0 -
Yes it is and thanks for the link. I think I've worked it out now. Cheers
0 -
Is this a Salus RT500 programable stat?
see a simple guide to programing here
http://www.salus-tech.com/cache/filelibrary/2030/library/fileLibrary/2013/7/RT500---RT500RF-Easy-Guide-006-1.pdf
Basically to need to program the temperatures that you require on different days at different times of those days.
It's not a case of on/off, the boiler will only fire up if the temperature set for that time on that day requires heat from the boiler to achieve the temperature that you have programmed.
Unfortunately was too quick off the mark and it's still coming on and going off at random times (especially during the night!) afraid your link doesn't work0 -
A bit of a long-shot, but is the boiler protected by a frost stat? (It would be if located in a garage or other outbuilding)
If so, it's been quite cold especially at night over the last week or so, and perhaps the boiler is being kicked into action due to the frost stat?0 -
Is your hot water set to "eco" mode on the boiler?
if not, then every hour, the water will be preheated for a minute or two (that's how it works on my Worcester Greenstar boiler)0 -
maggiesoup1 wrote: »Unfortunately was too quick off the mark and it's still coming on and going off at random times (especially during the night!) afraid your link doesn't work
But does the heating come on when you want ON and go OFF when you want it to?
After entering your required settings did you step though the program to check that you had correctly set the desired set point temperatures for each time period for each day?
Are you aware that this stat uses a 12 Hour clock with AM & PM indicators and can be programmed in either 5 days + 2 weekend days OR 7 separate days?
The full manual is available here http://www.salus-tech.com/cache/filelibrary/4756/library/fileLibrary/2015/11/Salus-RT500-Manual-006-lr.pdf
I posted a link to an easy guide which was working on Saturday but they have now removed it from their server.
This is the easy guide, save it if it is useful to you as it shows the sequence of keypresses required to enter your settings and it is easier to understand.
This stat in 7 day programming mode, allows you to programme five different sets of time and set point temperatures for each day of the week to give a total of 35 separate programme settings.
Basically you need to set a desired set point temperate when you require heating and a set back temperature of say 10 degrees, for when you do not want heating e.g. during the day when you are out or during the night.
It is very unlikely to be the frost protection but the eco mode will cause the boiler to fire up if it is enabled.0 -
Biscuit_Tin wrote: »A bit of a long-shot, but is the boiler protected by a frost stat? (It would be if located in a garage or other outbuilding)
If so, it's been quite cold especially at night over the last week or so, and perhaps the boiler is being kicked into action due to the frost stat?
No, I've not needed too use the frost start as both boiler & programmer are in the house and the lowest temp I've set it to is 7 degrees throughout the night.0 -
-
But does the heating come on when you want ON and go OFF when you want it to?
After entering your required settings did you step though the program to check that you had correctly set the desired set point temperatures for each time period for each day?
Are you aware that this stat uses a 12 Hour clock with AM & PM indicators and can be programmed in either 5 days + 2 weekend days OR 7 separate days?
The full manual is available here http://www.salus-tech.com/cache/filelibrary/4756/library/fileLibrary/2015/11/Salus-RT500-Manual-006-lr.pdf
I posted a link to an easy guide which was working on Saturday but they have now removed it from their server.
This is the easy guide, save it if it is useful to you as it shows the sequence of keypresses required to enter your settings and it is easier to understand.
This stat in 7 day programming mode, allows you to programme five different sets of time and set point temperatures for each day of the week to give a total of 35 separate programme settings.
Basically you need to set a desired set point temperate when you require heating and a set back temperature of say 10 degrees, for when you do not want heating e.g. during the day when you are out or during the night.
It is very unlikely to be the frost protection but the eco mode will cause the boiler to fire up if it is enabled.
Thanks for all the info. I've now saved the full instructions link into my favourites for looking at over the weekend. I really think I've set the timings OK but it just goes off randomly, ie last night at 8.30pm all the radiators were cold yet I'd set the heating to go off at 10.30pm??? I've got the heating engineer who fitted the boiler coming out to look at it tomorrow. He thinks my maybe my neighbour has the same system and I'm picking up his wireless programme. Most people I speak to think this RT500 is way too complicated. Be interesting to see what his conclusions are.
Thanks to everyone who have helped out, appreciate it.0
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 355.9K Banking & Borrowing
- 255K Reduce Debt & Boost Income
- 456.2K Spending & Discounts
- 248.4K Work, Benefits & Business
- 606.1K Mortgages, Homes & Bills
- 179.1K Life & Family
- 264K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.2K Discuss & Feedback
- 37.7K Read-Only Boards