Replacement chrome french door handles

searchlight123

hi all
i need 2 chrome sets to replace ones in my upvc french doors. the type that take the standard euro barrel lock.
mine seem to be an odd size in as much as the backplate is lengthy at 255mm and the fixing hole centres are 235mm apart.
i can't seem to find this size anywhere.

can anyone point me in the right direction?
many thanks.

leveller2911

You don't really give enough info Tony. What are the "centres" (measurement between the centre of the spindle /handle hole and the centre of the Euro cylinder.Would be handy to know the width of the faceplates..

Just a guess but would these be any good..

http://www.ironmongerydirect.co.uk/products/door_furniture/multipoint_lock_handles/94394/adjustable_maintenance_handle/195629

SatanicHare

If they're 92pz, the fab n fix blenheim would probably do the trick
http://www.fabnfix.co.uk/store/products/the_e_series/door_handles/blenheim/blenheim_lever_lever/

searchlight123

leveller2911 wrote: »

You don't really give enough info Tony. What are the "centres" (measurement between the centre of the spindle /handle hole and the centre of the Euro cylinder.Would be handy to know the width of the faceplates..

Just a guess but would these be any good..

http://www.ironmongerydirect.co.uk/products/door_furniture/multipoint_lock_handles/94394/adjustable_maintenance_handle/195629

thanks for reply.
overall backplate is 257mm in length by 27mm wide.
fixing screw centres are 235mm
from centre of spindle to centre of eurolock is 120mm

pic attached

http://s17.postimg.org/stfwx7rsr/door_handle.jpg?noCache=1452154434

thanks

searchlight123

SatanicHare

Possibly an older Millenco lock, 117 pz rather than 120, chrome handles are hard to come by. If you google 117 pz Millenco you might find somethig

searchlight123

Many thanks for the tip off.
I will search online for those.