We’d like to remind Forumites to please avoid political debate on the Forum.

This is to keep it a safe and useful space for MoneySaving discussions. Threads that are – or become – political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.

📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Advice re fitting a wooden gazebo

Not sure if here or the gardening thread is best for this?
I have purchased a wooden gazebo kit which is 2.4m square. It comes with drive-in post anchors. I am habving trouble loading the image but it is the right hand photo on the link below. The blade part of the anchor is 45cm (although the photo is a bit stretched so it appears much longer).

http://thehomeandgardensite.co.uk/e...bca5-4954-4f68-8b7e-47f5020142bd/Categories/5


The anchors are 95mm and I am having trouble finding a drive-in tool to fit this size, does anyone know where I can get one? The plan is for the gazebo anchors to go straight into earth so not cemented in. Does anyone have any tips for the best way to do this given the depth needed, any particular type of mallet, assuming I can get a drive-in tool to fit. Also, are there any tips for ensuring they go in straight and precise (needs to be 2.4m square) other than to measure and measure again.

Grateful for any advice offered.

I can offer no resistance, I can offer no respite
Wake me when conflict is over,
I aim for a peaceful life,
Wake me up when the fury is ended
I like living a peaceful life

Comments

  • 27col
    27col Posts: 6,554 Forumite
    I've just erected one of these with a friend. The finished item is so heavy that it hardly needed to be fixed down. Ours was on a concrete base with bolt down post anchors.In your case I would suggest using a lump hammer or a sledge hammer. Using a piece of wood to protect the fixing blade.
    I can afford anything that I want.
    Just so long as I don't want much.
  • Philip624
    Philip624 Posts: 717 Forumite
    Part of the Furniture 100 Posts Name Dropper
    27col wrote: »
    I've just erected one of these with a friend. The finished item is so heavy that it hardly needed to be fixed down. Ours was on a concrete base with bolt down post anchors.In your case I would suggest using a lump hammer or a sledge hammer. Using a piece of wood to protect the fixing blade.

    Thanks, I cant seem to find a driving in piece of wood to fit though, I have seen plenty that are 75mm. The posts are thicker than that though to make the less susceptible to bowing. Thats true re the weight though it may be that the weight of it will push the anchors down at least a bit so I wouldnt need to bash them in all the way.

    We are considering paving so maybe it would be better to pave first and for it to sit on the paving with bolt downs as you suggest.
    I can offer no resistance, I can offer no respite
    Wake me when conflict is over,
    I aim for a peaceful life,
    Wake me up when the fury is ended
    I like living a peaceful life
  • 27col
    27col Posts: 6,554 Forumite
    edited 15 October 2015 at 9:32AM
    Much better and easier to build it off from a solid base. You'll have a great deal of difficulty getting it level if you don't.
    I can afford anything that I want.
    Just so long as I don't want much.
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 352.4K Banking & Borrowing
  • 253.7K Reduce Debt & Boost Income
  • 454.4K Spending & Discounts
  • 245.5K Work, Benefits & Business
  • 601.3K Mortgages, Homes & Bills
  • 177.6K Life & Family
  • 259.3K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16K Discuss & Feedback
  • 37.7K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.