We'd like to remind Forumites to please avoid political debate on the Forum... Read More »
We're aware that some users are experiencing technical issues which the team are working to resolve. See the Community Noticeboard for more info. Thank you for your patience.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
Front anti roll bar on Vauxhall Corsa D?
Options
Comments
-
£25ish for the part, a bit more for a decent quality one that won't need doing again next year - and probably an hour labour if it comes apart easily.0
-
Wont be expensive, but you have to work out if it is the body mounting bush (anti roll bar bush) or the drop-link.0
-
They said £60 and an hours labour which I thought was pretty steep so I thought I'd get a second opinion.. Thanks for the help guys
Ok don't blame you then, you did right;)
I had my Alfa 147 repaired lower offside ball joint replaced only recently, like you it was last years advisory on the mot, even though it did not fail the mot this time round , I had it replaced , I watched him do it , it was a bit tricky I must say , the total charge was £77 , I provider the ball joint complete with the arm & it was £37 ,so the labour was £40 & I bet it was 3 hours work , no brew , but I trust the garage & they will be doing the cam belt when the weather gets warmer.0 -
Take the play up in the joint.Don’t be a can’t, be a can.0
-
-
Ok don't blame you then, you did right;)
I had my Alfa 147 repaired lower offside ball joint replaced only recently, like you it was last years advisory on the mot, even though it did not fail the mot this time round , I had it replaced , I watched him do it , it was a bit tricky I must say , the total charge was £77 , I provider the ball joint complete with the arm & it was £37 ,so the labour was £40 & I bet it was 3 hours work , no brew , but I trust the garage & they will be doing the cam belt when the weather gets warmer.
Your on about the wishbone, not the ARBar.
1-1.5hrs. 2 absolute max.
Can be tough to get the pinch bolt and ball joint out and a tad fiddly at the rear but certainly not tricky nor anything close to 3hrs0
This discussion has been closed.
Confirm your email address to Create Threads and Reply

Categories
- All Categories
- 350.8K Banking & Borrowing
- 253K Reduce Debt & Boost Income
- 453.5K Spending & Discounts
- 243.8K Work, Benefits & Business
- 598.6K Mortgages, Homes & Bills
- 176.8K Life & Family
- 257.1K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.1K Discuss & Feedback
- 37.6K Read-Only Boards