We're aware that some users are experiencing technical issues which the team are working to resolve. See the Community Noticeboard for more info. Thank you for your patience.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Panel heater or additional radiator

Options
Just moved into new house and the back room is too cold. If the door is left open it does warm up with hat from rest of house.
It's about 17 square meters and only had a single convector designer radiator which I believe is not powerful enough to heat room.
Options are more powerful radiator in the same position. Vertical so quite expensive. Bit of chasing out and alteration of pipework to accommodate new size.

Another additional radiator. Hard as pipework is in walls so will be messy

Or I've been thinking about a panel heater to use as and when we need it. We have tea in the room so a timer to come on around 5pm for couple of hours or when needed. Ideally it will also be a second chill out lounge.

Would this be feasible or is the more powerful radiator the better option?
«1

Comments

  • more powerful radiator is the better option.

    Fan assisted radiator may be viable if you need rapid heat-up and are short of wall space.
    http://www.gasapplianceguide.co.uk/myson_slimline_heaters.htm
    A kind word lasts a minute, a skelped erse is sair for a day.
  • jhs14
    jhs14 Posts: 167 Forumite
    I'm in the same position. The only space for a radiator in my open plan kitchen/dining room is max 400mm of wall space. Previous owners installed a fancy curved vertical radiator that is pretty much useless (puts out about 2500BTU, the room requires at least 6000). My only solution is the biggest vertical column radiator that I can squeeze into the space - I'm thinking about a 4-column rad, it's near a corner so doesn't matter too much if it sticks out a bit.

    Yes they are pricey. Even standard column radiators, which are seen as 'designer' as well.
  • lstar337
    lstar337 Posts: 3,443 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Combo Breaker
    If your radiators are connected to GCH, then an electric panel heater will cost ~3x as much to heat the room.
  • jhs14 wrote: »
    I'm in the same position. The only space for a radiator in my open plan kitchen/dining room is max 400mm of wall space.

    Or a plinth heater.

    http://www.gasapplianceguide.co.uk/myson_kickspace_heaters.htm
    A kind word lasts a minute, a skelped erse is sair for a day.
  • prosaver
    prosaver Posts: 7,026 Forumite
    Part of the Furniture Combo Breaker
    weve got a extension we use now and then and we put a real big radiator in (cost 50 quid labour) and put it off and on when we need it...however I switch the rads off upstairs to help it kick in quicker (things i do to save money) .........worth it though
    “Life isn't about finding yourself. Life is about creating yourself.”
    ― George Bernard Shaw
  • jonnyb1978
    jonnyb1978 Posts: 1,362 Forumite
    Part of the Furniture 1,000 Posts Combo Breaker
    Cheers people. Think it a more powerful radiator then.
  • jhs14
    jhs14 Posts: 167 Forumite

    Indeed, and I am considering it - the room is L shaped, with the radiator round the corner from the kitchen. Considering installing a plinth heater in the far end of the kitchen. What puts me off though is the annoyance of not having it integrated with the rest of the CH system (ie, same thermostat controls etc)
  • prosaver
    prosaver Posts: 7,026 Forumite
    Part of the Furniture Combo Breaker
    jhs14 wrote: »
    Indeed, and I am considering it - the7XggJ2oJroom is L shaped, with the radiator round the corner from the kitchen. Considering installing a plinth heater in the far end of the kitchen. What puts me off though is the annoyance of not having it integrated with the rest of the CH system (ie, same thermostat controls etc)

    Move the rad ..... 50 notes. ....no problems ..g3t over it
    “Life isn't about finding yourself. Life is about creating yourself.”
    ― George Bernard Shaw
  • PheoUK
    PheoUK Posts: 351 Forumite
    jhs14 wrote: »
    Indeed, and I am considering it - the room is L shaped, with the radiator round the corner from the kitchen. Considering installing a plinth heater in the far end of the kitchen. What puts me off though is the annoyance of not having it integrated with the rest of the CH system (ie, same thermostat controls etc)

    You can get wet CH plinth heaters with fan assist. Just depends if you can get a CH pipe there. Drop one down from the floor above? Thats how all of our downstairs ones are done!
  • jhs14
    jhs14 Posts: 167 Forumite
    prosaver wrote: »
    Move the rad ..... 50 notes. ....no problems ..g3t over it
    As I said, nowhere to move it to. But thanks for the insightful advice.
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 351K Banking & Borrowing
  • 253.1K Reduce Debt & Boost Income
  • 453.6K Spending & Discounts
  • 244K Work, Benefits & Business
  • 599K Mortgages, Homes & Bills
  • 176.9K Life & Family
  • 257.4K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.