replacement side panel for wall hung kitchen unit

tired_dad

See post below: Ive !!!!!!ed up a repair job and need a replacement white gloss end panel.

Any ideas where I might bet one would be very welcome





Hi

We have a wall hung cupboard in our kitchen that is close to the hob (not too close). Over years (I presume due to heat) the laminated foil on the side panel has peeled off.

Didn't notice it really till a few weeks ago,

It has now come off completely. The foil is in one whole piece.

Wanted advice on the best product to glue the two back together.

Ta

Ianwzzz

I've used contact adhesive before. Very messy though.

http://www.toolstation.com/shop/p14503

tired_dad

Used it but messed it up. The stuk stuck permanently on first contact. No scope for minor adjustments.

My fault.

Now need a replacement end panel about 72x 36 cm and 2 com thick with white gloss finish.

Suggestions where I would get this?

tired_dad

Title changed and bumped.

Thanks for any guidance

Ruski

Clicky requires scribing and cutting to fit as oversized.

HTH

Russ

squiggles

Could you swap the end panel with another end panel from another cupboard that the side is hidden, as in an end panel which butts against a wall? Presuming it's the same size. It could be far too much hassle though as well as the difficulty aspect of taking cupboards apart if you are not confident to do so but it would not cost any money. Then again you have to weigh up the risk of possibly ruining the unit if it has glued joins. My kitchen units came flat packed and screwed together with Allen keys which is the reason of my stupid idea.

paddypaws101

I bought custom cut panels from here for my floor cupboards, just glued them over the existing stained panels.
http://www.theplasticman.co.uk/index.php?gclid=CjwKEAiA05unBRCymrGilanF9SwSJACqDFRma1eHNcXjo61yZfNF2dr5-rohqiwKJSVG477uALcn3RoC-1nw_wcB