We’d like to remind Forumites to please avoid political debate on the Forum.

This is to keep it a safe and useful space for MoneySaving discussions. Threads that are – or become – political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.

📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
The Forum now has a brand new text editor, adding a bunch of handy features to use when creating posts. Read more in our how-to guide

Issues since additional loft insulation

We had the extra thickness loft insulation put in about 18months ago. Since then the house has had a lot more condensation and wet patches appear in the ceiling below the loft space if that makes sense .

Would we be better removing the extra insulation and sticking with the original thickness

Thanks in advance

Comments

  • go_cat
    go_cat Posts: 2,509 Forumite
    I've been Money Tipped!
    imho wrote: »
    Thank you
    If these are vents in the roof felt then we have already done that. :(:(
  • ROY47
    ROY47 Posts: 582 Forumite
    Part of the Furniture 500 Posts Name Dropper Combo Breaker
    go_cat wrote: »
    We had the extra thickness loft insulation put in about 18months ago. Since then the house has had a lot more condensation and wet patches appear in the ceiling below the loft space if that makes sense .

    Would we be better removing the extra insulation and sticking with the original thickness

    Thanks in advance

    YES it would be better
  • C_Mababejive
    C_Mababejive Posts: 11,668 Forumite
    Part of the Furniture 10,000 Posts Name Dropper Combo Breaker
    Have you ensured that the soffit vents are clear and not covered or obstructed by the insulation? What about the loft lid..is it a snug fit? You may need further vents at or close to the roof pitch
    Feudal Britain needs land reform. 70% of the land is "owned" by 1 % of the population and at least 50% is unregistered (inherited by landed gentry). Thats why your slave box costs so much..
  • go_cat
    go_cat Posts: 2,509 Forumite
    I've been Money Tipped!
    Yes checked the eaves , added extra vents in felt, insulation pulled over hatch on inside ...we cannot understand why it is still so bad .

    Currently have 2 x dehumidifiers going one up one down.

    So tempted to roll it all up and get it out loft :o
  • brightontraveller
    brightontraveller Posts: 1,379 Forumite
    edited 11 December 2014 at 2:25AM
    Catch 22 insulation makes the house warmer, this warm air holds more moisture either remove insulation or add more ventilation ,maybe ridge vents or tile vents high in the roof pitch
  • getmore4less
    getmore4less Posts: 46,882 Forumite
    Part of the Furniture 10,000 Posts Name Dropper I've helped Parliament
    Don't think better roof/loft ventilation will help the issues inside the house

    What do you think is generating the moisture in the house.

    Showers, cooking, lack of ventilation, drying clothes...?

    Is the ceiling damp from inside the room or excess in the loft?
  • Furts
    Furts Posts: 4,474 Forumite
    Catch 22 insulation makes the house warmer, this warm air holds more moisture either remove insulation or add more ventilation ,maybe ridge vents or tile vents high in the roof pitch

    I would agree but also add a bit of logical, or perhaps lateral, thinking. When the fibreglass layer was quite thin, the top surface would tend to be warmer. Now it is thicker, the top will be cooler. Hence condensation could occur within the fibreglass.

    New houses would, typically, have a polythene membrane to stop the moisture passing through the plasterboard. Foil backed plasterboard may also be used. Furthermore, whilst it may not always be done, even cable holes and light fittings are meant to sealed to prevent moisture going through the plasterboard.

    All this is aimed at keeping the fibreglass warm, and there has been a move to get warmer roof spaces without the flow of air over the top of the fibreglass. This flow chills the fibreglass and increase heat losses.
  • ispookie666
    ispookie666 Posts: 1,194 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Combo Breaker
    “Don't raise your voice, improve your argument." - Desmond Tutu

    System 1 - 14 x 250W SunModule SW + Enphase ME215 microinverters (July 2015)
    System 2 - 9.2 KWp + Enphase IQ7+ and IQ8AC (Feb 22 & Sep 24) + Givenergy AC Coupled inverter + 2 * 8.2KWh Battery (May 2022) + Mitsubishi 7.1 KW and 2* Daikin 2.5 KW A2A Heat Pump
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 354K Banking & Borrowing
  • 254.3K Reduce Debt & Boost Income
  • 455.3K Spending & Discounts
  • 247.1K Work, Benefits & Business
  • 603.7K Mortgages, Homes & Bills
  • 178.3K Life & Family
  • 261.2K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.7K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.