Dual-Channel Wireless thermostat?

NewtoDIY

Need to replace my Randall 972. Has anyone got any recommendations for a wireless dual-channel programmer that I can take into each room? I don't want to fit a wall stat.

Was looking at Honeywell CM927 but it's only single channel so looking for alternatives as I need the hot water integration as well. I noticed that the new Salus IT500 is out but wondering if there are any other good ones on the market?

Thanks as always.

Myser

Other than the Salus IT500, have a look at these:

http://www.glow-worm.co.uk/trade/boilers-2/controls-3/climapro1-rf/

http://www.heatmisershop.co.uk/thermostats-c1/wireless-thermostats-c11/slimline-wireless-thermostats-c27/heatmiser-prthw-w-wireless-programmable-thermostat-with-hot-water-output-p74

http://www.heatmisershop.co.uk/thermostats-c1/wireless-thermostats-c11/complete-wireless-kits-c30/heatmiser-prthw-wts-kit-wireless-programmable-thermostat-with-hw-output-p84

Mr_Ted

Just put the Hot Water on a simple timer then a single channel will work OK!

I have a dual channel Danfoss RX2 BUT i have seperate zones for upstairs and down with there own RF stats and the HW is on a simple timer, and it works well!

NewtoDIY

Mr_Ted wrote: »

Just put the Hot Water on a simple timer then a single channel will work OK!

I have a dual channel Danfoss RX2 BUT i have seperate zones for upstairs and down with there own RF stats and the HW is on a simple timer, and it works well!

Good point. I could just keep my Randall for hot water and add a single channel to control heating. It's nice to have it one though, preferably on a portable controller so that I don't need to keep switching the water on near the kitchen sink!

Andehh

I have just bought the Heatmiser touch screen one linked above, and have it looked in to be installed on Monday. Seemed to be the best bit of kit for what i wanted (same as you by the sound of it).

MAKE SURE you get the 'HW' one, for hot water controls!

It is £115 on their ebay page INCLUDING postage, compared to +£5 on their website for it posted.

gas4you

Honeywell RF2 pack 3 is what you need.