sky Link Instructions

The_Bargain_Hunters

Does anyone know how to set up Sky Link?
I have changed TV's and now I can't get it to work, (the remote controls the TV but no sky) and can't find the instructions.
Any ideas????????

BexTech

If the cable is in RF2 and is not broken or the outer shielding not touching the inner core (many people wrap this around the inner core!!) then maybe the power to the RF2 has got switched off.

[Services] 4 0 1 [Select]
You should then find access to the RF2 outlet and switch the power on to this.

[Deleted User]

Hi,

here's a link, mighy help.

The_Bargain_Hunters

Many thanks to the above, however, it is the control of the 2nd TV that is the problem (the link itself blinks and I can use the sky remote to control the tv) I have tried to put the code in but I seem to think it was a different code for the sky link, as when I press sky it come up "no signal"

The realy annoyying thing is the last TV seemed to install it all itself until I unplugged it then it would not work!!

BexTech

Have you tuned the TV into the correct RF channel of the Sky output?

The code is only required to match it with the TV you have to control the TV functions.

The remote will work the Sky box with no code or any code as the remote is already matched / designed for the Sky box and is no way of changing it anyway.

The remote will work Sky box direct or via the link, as it's the correct remote.

The code only has to be entered if you wish to use the Sky remote to also control your TV.

Is it the Sky box saying no signal, or your TV? If it's the Sky box then it will be saying no signal on the main TV too.

It should just have been a case of unplugging from old TV, connect to new TV, ensure Sky box is switched on and then scan for new channel / manually tune the channel in, then if you want the remote to also control the TV and not just the Sky box enter the TV code.