We’d like to remind Forumites to please avoid political debate on the Forum.

This is to keep it a safe and useful space for MoneySaving discussions. Threads that are – or become – political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.

📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
The Forum now has a brand new text editor, adding a bunch of handy features to use when creating posts. Read more in our how-to guide

My Experience With Windows 8

245

Comments

  • Lum
    Lum Posts: 6,460 Forumite
    Part of the Furniture 1,000 Posts Photogenic Combo Breaker
    edited 2 February 2013 at 4:56PM
    ^^^ Windows Defender (in Win8) is basically MSE with a new name and built into the OS. There is a little more to it than that, but this is the summary version :)

    There's nothing "wrong" with it per-se. It's not going to crash your system and delete your important documents, you need to install McAfee if you want that, it's just that it's detection rates aren't as good as they were a few years ago, so more stuff slips through.
    Gillor wrote: »
    Says who?

    AVG Anti-virus Free 2013 came out better for protection than any other free a/v tested by Av-Test.org in November/December.

    And yet the most recent AV-Comparatives.org test gives AVG a score of 1 star or "standard", out of a maximum of 3, putting it only one grade above the likes of McAfee which, predictably, gets the lowest rating possible.
  • Jivesinger
    Jivesinger Posts: 1,221 Forumite
    Ninth Anniversary Combo Breaker
    JulyKnot wrote: »
    Oh I do remember now being at that page when I set it all up and chose "as items arrive" thinking that would be fastest.
    Hmm I suspect it is supposed to be the fastest version. But for testing, if you can get the manual option to work, it might be more use (although you'd want to remember to switch it back to one of the automatic options when you were done testing).
  • prowla
    prowla Posts: 14,317 Forumite
    Part of the Furniture 10,000 Posts Name Dropper
    GDT78 wrote: »
    Switching between Metro and Desktop is easy and intuitive using the mouse to the top and bottom left and right corners - you get used to switching quickly.
    It would be a lot better if it didn't have a split personality and you didn't have to switch modes...
  • prowla
    prowla Posts: 14,317 Forumite
    Part of the Furniture 10,000 Posts Name Dropper
    I tried Start Menu X, but it behaved a bit erratically and then crashed.
    So I uninstalled it.
  • JulyKnot
    JulyKnot Posts: 189 Forumite
    I wonder if I should start a new thread?

    I know it's probably me causing the issues but I don't know how to fix.

    This new windows 8 suddenly this afternoon couldn't find wifi connections until I used a troubleshooter. I'm now back on wireless but nervous. I think the problems are due to trying to connect a print/copy/scanner wirelessly. Too much of a coincidence otherwise.

    There is only one printer in the house and yet it has different names on different devices. Most say offline when it is on.
    i tried scanning a document and couldn't see where the scan was. eventually found it had saved on a different machine ( wirelessly).

    How do I go about undoing the mess and starting again?
    I just want all devices to be able to print wirelessly and dictate which machine scans are sent to.
    Very confused.
  • Lum
    Lum Posts: 6,460 Forumite
    Part of the Furniture 1,000 Posts Photogenic Combo Breaker
    Wireless printers are a pain in the backside. Far easier to use a cable if you happen to keep it somewhere near your router.

    First thing I'd do would be to give the printer a static IP address. You can do this on your router though the method varies depending on what router it is.

    Then I'd just delete all the printer entries from your computers and start again.
  • JulyKnot
    JulyKnot Posts: 189 Forumite
    Yes the printer is quite close to the router. Are you saying connect the printer to the router ( which has 4 ethernet slots) with an ethernet cable?

    I don't know how to assign a static IP address. I was aware that nothing was static as whenever a device is switched on again, it had a newIP address.
  • Lum
    Lum Posts: 6,460 Forumite
    Part of the Furniture 1,000 Posts Photogenic Combo Breaker
    If you can connect it easily enough with an ethernet cable, it removes one possible point of failure.

    As for assigning a static IP, you can either assign it on the printer (giving it a fixed IP address outside the range that the router assigns dynamically) or on the router (telling the router to always assign the same IP to the printer, when the printer requests a dynamic IP)

    Both cases will need you to look at how the router is set up, so the second option is probably the easiest. It's still different on every router so you'll need to read the manual sorry.
  • lynnemcf
    lynnemcf Posts: 1,233 Forumite
    I've just got a new laptop with Windows 8 and I am completely defeated by it ... I have no idea how to find anything, is there an online tutorial? I'm completely non-tekky, I dont have any apps on my phone, I only do word processing and surf the net on my laptop, and I'm finding Windows 8 very hard to navigate
  • Jivesinger
    Jivesinger Posts: 1,221 Forumite
    Ninth Anniversary Combo Breaker
    There are a few links (including one to a free "Dummies" e-book) here:
    https://forums.moneysavingexpert.com/discussion/4402565
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 354K Banking & Borrowing
  • 254.3K Reduce Debt & Boost Income
  • 455.3K Spending & Discounts
  • 247.1K Work, Benefits & Business
  • 603.7K Mortgages, Homes & Bills
  • 178.3K Life & Family
  • 261.2K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.7K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.