Cutting an extractor fan?

callmechar

The extractor fan we have just purchased is too long. What this means is that we need to cut the chimney hood part as it is just too big. It will not push back into itself - its rubbish.

Its similar to this one:
http://www.argos.co.uk/static/Product/partNumber/4895754.htm


So how is the best way to cut it? We used a handsaw but this has left a scratched edge and doesn't look great. We could cut a bit more off of it, but how can we do this without damaging it?

vaio

masking tape along the cut line, careful cutting with a fine tooth hacksaw and then a wipe with a file to get rid of the burrs

callmechar

vaio wrote: »

masking tape along the cut line, careful cutting with a fine tooth hacksaw and then a wipe with a file to get rid of the burrs

Thanks, I think my husband did this but the metal still got damaged. Anything else we could try?

vaio

try a different husband

Seriously, the way suggested above is the best way and will give a flawless finish if done as described. Always cut from the visible side, use a fine toothed blade (junior hacksaw would suit), don't rush and he'll be fine.

phill99

I fit kitchens for a living. This is a common problem with extractor chimneys.

Doing it yourself will result in the chimney being mullered.

I always take them to a local metal fabricators. They have all the skills, and importantly, all the right tools to get a nice straight, neat cut. It costs me £20 but well worth it.