Help removing terminal block cover

brenda50

........ on the back of my new BEKO cooker. I have removed the two screws at the side of it and there is a picture of a screw driver with arrows pointing to the base of the box. However, I cant get it to budge at all. There is a small loop on the base which I have pulled this way and that but still no luck. Please help!!

mwbrown

from memory on the beko cookers we install at work, sometimes they have a single screw in the cover - and then you if you look at the very bottom of the cover underneath, theres usually a couple of notches where you insert a flat blade screwdriver and gently praise the cover open - usually one side first, then holding the side you have just open, gently prise the other side open.

Hope this helps and you can understand..

Mike

brenda50

Yes it worked! Many thanks

mwbrown

You are welcome...