Grrrr - Can anyone help me PLEASE?

Twinny99

I turn my laptop on, the first screen comes up with "Fujitsu Siemens" on it then the windows logo screen comes up, the one with the logo flag thing on it and the bar with the blue lights scrolling across it, then it just loops back to the fujitsu siemens screen again! WFT????:mad: :mad:

On the Fujitsu Siemens screen there is the option (if you press it really quick) to press F2 and it brings you into a screen full of gobbledeegook.

Any ideas whats wrong with the pesky lappy now? Im gonna chuck it straight out of the window at this rate. Have been without my lappy since Thursday night now and have resorted to borrowing my friends cause i was getting severe withdrawal symptoms.

Help pls techie guys n gals??

Reluctant_spender

Are there any disks in the drive - are all drives fitted securely?

CHR15

When you press the power on button, keep tapping F8 on your keyboard until you see a list of menu options.

select SAFE MODE and hit enter

See if it will boot now, the screen will look a mess but hopefully you will be able to get into windows and go from there.

Bucky

It could be a number of things, but the most likely are memory and harddrive. From what you've described I would think that either some files on your hardrive have become corrupt or the harddrive is on the way out.

The best thing to do is try booting up with a startup cd (I use pe builder and check to see if toy can access your harddrive from there.

If you can't then your hardrive had become corrupt. If you can then check the memory

Twinny99

CHR15 wrote: »

When you press the power on button, keep tapping F8 on your keyboard until you see a list of menu options.

select SAFE MODE and hit enter

See if it will boot now, the screen will look a mess but hopefully you will be able to get into windows and go from there.

Tried that and loads of white writing came up on the screen but then it just went back to doing the same loop between the 2 screens thing

Twinny99

Bucky wrote: »

It could be a number of things, but the most likely are memory and harddrive. From what you've described I would think that either some files on your hardrive have become corrupt or the harddrive is on the way out.

The best thing to do is try booting up with a startup cd (I use pe builder and check to see if toy can access your harddrive from there.

If you can't then your hardrive had become corrupt. If you can then check the memory

Going to try this now

Twinny99

Should I try putting my windows disc in - the one that came with the laptop when it was new?

superscaper

Twinny99 wrote: »

Should I try putting my windows disc in - the one that came with the laptop when it was new?

You could try that (press delete when booting up to go into BIOS and make sure CD drive is first in the boot sequence). You should get an option to repair the windows installation after booting from cd which is almost like a reinstall but your documents, settings and programs should be left intact.

Twinny99

superscaper wrote: »

You could try that (press delete when booting up to go into BIOS and make sure CD drive is first in the boot sequence). You should get an option to repair the windows installation after booting from cd which is almost like a reinstall but your documents, settings and programs should be left intact.

OK Cd is in there and I have a blue screen with windows setup in the lop left corner and lots of white writing in the bottom left corner it now says welcome to setup.
press R to repair a windows installation -d ine one
screen gone black again it now says:

1: C:/windows

which windows installation would you like to log onto - so ive pressed '1' then enter



Its asking me for an administrator password????????????????? I dont have
one :mad: :mad: what now????

Browntoa

there is no Admin Password...it is blank, unless you set one !!