Help with tilting vessels on Gas cooker hob

ksra

Hi everyone,

Please I need suggestion.We have taken a new house.
The kitchen is IKEA brand.The gas cooker hob is good.But one problem.If any vessels are placed which are not flat then the vessels are tilting and falling down.
what i should look for(device,tool,hob).What should I ask for in the shop and which shop should I go

Please help

kwatt

You can sometimes get a small wire stand that fits onto the pan supports to accommodate smaller pan sizes but they will almost certainly be model specific as they have to fit those specific pan supports.

Other than that I don't know of anything if I'm reading you right.

K.

ksra

Hi kwatt
Thanks for the reply.Where can I get small wire stand that fits onto the pan support

ksra

I am looking for response from any one who are reading this post please.

mart.vader

If you have an Ikea kitchen and a standard gas cooker hob, normal sized pots and pans (with flat bottoms) will fit the hob and be stable (not tilting) without any problems.

Why do your pots and pans tilt? Is it because they have rounded bottoms? Are they too small or too large for the hob? Is the hob not level?

If you have kids, I suggest you keep them well away from the hob.

societys_child

Would have thought "vessels" with rounded bottoms are likely to tilt on any normal hob.

Could they be adjusted with a lump hammer . . .

penguingirl

I've just bought new hobs (but not Ikea) and it mentions that you can buy a 'wok stand' for rounded bottoms (impossible to type that in without giggling). A quick google brings up lots of options so it might be worth doing OP?