What will it cost to relocate my water tank

My water tank in the attic is bang in the middle of floor so I can't really organise the loft so it resembles something more tidy and practical to use. Does anyone have any experience of the sort of cost and implications of work involved
Many Thanks in advance
If youcan lie down at night knowing in your heart that you just made someone’s day just a little bit better,you know you had a good day!!

Comments

  • 27col
    27col Posts: 6,554 Forumite
    Can't imagine that it would cost much at all. It would be a very simple job for anyone with the slightest knowledge of simple plumbing.
    I can afford anything that I want.
    Just so long as I don't want much.
  • DavidFx
    DavidFx Posts: 248 Forumite
    Part of the Furniture 100 Posts Combo Breaker
    If this is a CW storage tank then it will weigh quite a bit ( 40 gallons = 400lbs) and the reason it is in the centre of the loft is that there is probably a supporting wall underneath or nearby. You'll need to move it to a position where it is adequately supported
  • aliasojo
    aliasojo Posts: 23,053 Forumite
    Part of the Furniture 10,000 Posts Combo Breaker
    There are concrete footings under our house directly under the supporting wall that sits directly under the tank area.

    We had an architect and surveyor out when we first started our refurb and were told it could be potentially problematic and costly to move it due to the support issue.

    We ended up with a combi boiler and got rid of both the hot water and cold water tanks completely.

    Is it possible to put shelves in your loft so you have more storage space upwards iyswim? You could shelve the area around the tank too.
    Herman - MP for all! :)
  • FreddieM
    FreddieM Posts: 1,002 Forumite
    Part of the Furniture 500 Posts Photogenic
    DavidFx wrote: »
    If this is a CW storage tank then it will weigh quite a bit ( 40 gallons = 400lbs) and the reason it is in the centre of the loft is that there is probably a supporting wall underneath or nearby. You'll need to move it to a position where it is adequately supported

    thanks for that, it's located above the immersion tank which is in the airing cupboard in our second bedroom. are saying that it wouldn't be practical to move?
    If youcan lie down at night knowing in your heart that you just made someone’s day just a little bit better,you know you had a good day!!
  • FreddieM
    FreddieM Posts: 1,002 Forumite
    Part of the Furniture 500 Posts Photogenic
    aliasojo wrote: »
    There are concrete footings under our house directly under the supporting wall that sits directly under the tank area.

    We had an architect and surveyor out when we first started our refurb and were told it could be potentially problematic and costly to move it due to the support issue.

    We ended up with a combi boiler and got rid of both the hot water and cold water tanks completely.

    Is it possible to put shelves in your loft so you have more storage space upwards iyswim? You could shelve the area around the tank too.
    I do have shelves, but with a lot of Roofs, the joists in themselves are a bit of a hazard, it just seems the tank is the main feature in the attic and everything has to be shuffled around it. Because it's a post 90s build, there are no hidden cupboards under the stairs etc and I do try to utilise space.... It's a task I have set myself to try and sort over the coming weeks
    If youcan lie down at night knowing in your heart that you just made someone’s day just a little bit better,you know you had a good day!!
  • keystone
    keystone Posts: 10,916 Forumite
    edited 28 April 2012 at 6:06PM
    Yes its practical but you must have a good enough support structure in place as already mentioned. It doesn't need to be over a load bearing wall provided the timber structure is OK. Mine isn't over a load bearing wall and hasn't come down in 25 years.

    You must maintain the relative height separation between your CWT and F&E tank and there's one element of the plumbing you must get right.

    Its not sufficient to run either vent straight up from its current location then along horizontally and down over the tank in its new position. It must go up at an angle like this:

    verycrudevent.jpgverycrudevent.jpgverycrudevent.jpg

    the same goes for the vent for the F&E tank.

    HTH

    Cheers
    The difference between genius and stupidity is that genius has it's limits. - Einstein
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 349.9K Banking & Borrowing
  • 252.6K Reduce Debt & Boost Income
  • 453K Spending & Discounts
  • 242.8K Work, Benefits & Business
  • 619.6K Mortgages, Homes & Bills
  • 176.4K Life & Family
  • 255.7K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 15.1K Coronavirus Support Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.