Ready, steady… save!
You don’t need a chart to join in. Here are 2 ways to record your savings:
1. Cross it off
Pop a chart into your first post. Saved an amount? Cross it out! Read more »
£0.01 £0.02 £0.03
2. Write it down
Skip the chart and add updates to your first post. Read more »
“Another +£3 saved today. Go me!”
Use +£ before each new saving so it counts towards your total.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
What Router with a NAS hard drive ?
cem
Posts: 391
Forumite
in Techie Stuff
I currently have the standard Wireless sky router.
Now I am getting the QNAP TS-110 Turbo kit to act as a file server and for video streaming.
Not sure if the router is going to be able handle the demand so wondered if folks on here had any suggestions for a better alternative ?
Many thanks:)
Now I am getting the QNAP TS-110 Turbo kit to act as a file server and for video streaming.
Not sure if the router is going to be able handle the demand so wondered if folks on here had any suggestions for a better alternative ?
Many thanks:)
0
Comments
-
If its Wireless connections to your NAS then consider a dual channel bonded 802.11N 5Ghz router (Netgear Rangemax WNDR* for example).
The issue with N networks is that they have far less penetrating range compared to G 2.4Ghz connections, however the 5Ghz range is less saturated.
On a good day I can get 300Mb/s from my N 5Ghz network, whilst a G 2.4Ghz network is limited to 54Mb/s0 -
if you can, then I would go for EoP (Ethernet over power) connections (should be good for everything except laptops which need to be taken anywhere).
http://www.amazon.co.uk/s/?ie=UTF8&keywords=ethernet+over+power&!!!!!googhydr-21&index=aps&hvadid=9509363945&hvpos=1t1&hvexid=&hvnetw=g&hvrand=1476910248264578334&hvpone=&hvptwo=&hvqmt=e&ref=pd_sl_407c5c801a_e0 -
the router should be fine for your needs but you will have to read up on how to configure it,port forwarding and that ,
this is a good place to give you some off the settings you might need for port forwarding (not all routers are on this site )http://portforward.com/
the best thing for a NAS is wire ,just get a Cat5e cable or make one,plug it in to the router and NAS and put the NAS where you will not see it ,with some power and use the router's wifi like normal and you can access it through the router (if you set it up right),just use a static IP for the NAS ,job done,now play time starts with configuring the nas,
and remember to set the power setting right so it wakes up when you need it
they are not plug and play like most pc things
Ive been running synology NAS's for years,Qnap are similar for the pricethere or their,one day i might us the right one ,until then tuff0 -
Another thing to note is that Sky broadband terms and conditions state you must use the supplied Sky modem router.
While it's possible to find out the username and password (not the one to access your Sky account which is different) so you can use a non Sky modem, it's may not work if/when change the way their modems log onto the ADSL. Someone else may be better at explaining that bit.
Never trust information given by strangers on internet forums0 -
spannerzone wrote: »Another thing to note is that Sky broadband terms and conditions state you must use the supplied Sky modem router.
While it's possible to find out the username and password (not the one to access your Sky account which is different) so you can use a non Sky modem, it's may not work if/when change the way their modems log onto the ADSL. Someone else may be better at explaining that bit.
It works absolutely fine and they've not complained in the year I've been doing it.0
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 355.9K Banking & Borrowing
- 255K Reduce Debt & Boost Income
- 456.2K Spending & Discounts
- 248.4K Work, Benefits & Business
- 606.1K Mortgages, Homes & Bills
- 179.1K Life & Family
- 264K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.2K Discuss & Feedback
- 37.7K Read-Only Boards