Ready, steady… save!
You don’t need a chart to join in. Here are 2 ways to record your savings:
1. Cross it off
Pop a chart into your first post. Saved an amount? Cross it out! Read more »
£0.01 £0.02 £0.03
2. Write it down
Skip the chart and add updates to your first post. Read more »
“Another +£3 saved today. Go me!”
Use +£ before each new saving so it counts towards your total.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
Microfiche Developing.
TheHardWay
Posts: 15
Forumite
in Techie Stuff
Hi all :wave:
Does anyone know if it possiable to cheaply scan/develope microfiche slides>?
I have data on about 100 slides that i would love to get viewable on the pc.
I have tried them in a good scanner, but the images are too small.
I spoke to a company today who gave me a nice quote of £600 :eek:, they must think im mad.
Any thoughs would be apreciated.
Does anyone know if it possiable to cheaply scan/develope microfiche slides>?
I have data on about 100 slides that i would love to get viewable on the pc.
I have tried them in a good scanner, but the images are too small.
I spoke to a company today who gave me a nice quote of £600 :eek:, they must think im mad.
Any thoughs would be apreciated.
Sealed Pot Challenge #1801
0
Comments
-
As I understand it
So you have a £600 quote for doing the developing/printingscanning into individual files whatever of 100 fiches
Each fiche presumably contains many pages of data?
So that's £6 for processing each fiche
and say 10 pages of data (maybe) per fiche - thats 60p for each sheet.
Sounds reasonable to me.............................0 -
TheHardWay wrote: »I have tried them in a good scanner, but the images are too small.
Do you really mean that the image is just too small? If so, there are plenty of image manipulation tools available to make them bigger.
If you mean that the resolution is not good enough, are you sure that you have the scanner at its highest DPI setting? Most default to something low like 300x400, but my Canon scanner can be set to 4800x9600 DPI, which means that you can use it as a simple microscope at that resolution.
It will generate very large files as a result, which you may need to manipulate further with Photoshop or similar.0 -
Ok so im getting the feeling that maybe, there is more to it than i thought.
I thought someone would have the ability to just scan them as they are.Sealed Pot Challenge #18010 -
depending on microfiche size, coud have 40 or 84 images per slide or even more. So if you go for 84 images per slide x 100 = 8400 images, so 14 pence per image. Very good price.
What sort of imahes are they, they picture or txt filesMansion TV. Avoid at all cost's :j0 -
Myself, I would wonder if it is worth buying the equipment to read them digitally myself and doing it in my own time.
Hopefully I would save a few hundred quid doing so.0 -
If it was me, stick them in a Microfiche Viewer , click with digital camera , next etc..., cost minimal time .... ages4.8kWp 12x400W Longhi 9.6 kWh battery Giv-hy 5.0 Inverter, WSW facing Essex . Aint no sunshine ☀️ Octopus gas fixed 5.07 + Octopus Intelligent Flux leccy
CEC Email energyclub@moneysavingexpert.com0
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 356K Banking & Borrowing
- 255K Reduce Debt & Boost Income
- 456.3K Spending & Discounts
- 248.5K Work, Benefits & Business
- 606.2K Mortgages, Homes & Bills
- 179.1K Life & Family
- 264K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.2K Discuss & Feedback
- 37.7K Read-Only Boards
