Ready, steady… save!
You don’t need a chart to join in. Here are 2 ways to record your savings:
1. Cross it off
Pop a chart into your first post. Saved an amount? Cross it out! Read more »
£0.01 £0.02 £0.03
2. Write it down
Skip the chart and add updates to your first post. Read more »
“Another +£3 saved today. Go me!”
Use +£ before each new saving so it counts towards your total.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
autostart backup when connecting external hdd
robmar0se
Posts: 1,328
Forumite
in Techie Stuff
Hi, Theoretical question, not having tried this, but in theory should work?
With laptops external hdd's aren't always connected, especially when a schechuled backup is supposed to run, and can cause probs for unsophisticated users.
What I would like to do, and haven't done, is to load an inf file on the hdd so that when it is connected it automatically starts the backup program - which is likely to be Retrospect (this isn't a debate about which is the best backup suite though). I appreciate the circumstances may be different depending on whether XP, Vista, 7; however would like to start with XP. I tried this with a flash drive (I understand that there are issues with flash drives, altough not sure what the issue is) - I am hoping that with an external hdd connected via USB2 there may be an easier answer?
Anyone successfully done this and can demonstrate the procedure?
TIA
With laptops external hdd's aren't always connected, especially when a schechuled backup is supposed to run, and can cause probs for unsophisticated users.
What I would like to do, and haven't done, is to load an inf file on the hdd so that when it is connected it automatically starts the backup program - which is likely to be Retrospect (this isn't a debate about which is the best backup suite though). I appreciate the circumstances may be different depending on whether XP, Vista, 7; however would like to start with XP. I tried this with a flash drive (I understand that there are issues with flash drives, altough not sure what the issue is) - I am hoping that with an external hdd connected via USB2 there may be an easier answer?
Anyone successfully done this and can demonstrate the procedure?
TIA
0
Comments
-
One option unless you specifically want to use an inf file
You need to request a free license
http://www.oo-software.com/en/products/ooautobackup
The copy process will start automatically whenever you connect your USB/Firewire disk to the computer.0 -
Thanks Santer - my only concern with O&O - and you may put my mind to rest on this - is that we are replacing WD's secure backup which did this, but frankly gave no info on what it backed up, if indeed it worked at all, took forever, and didn't say when it had completed the backup. Unbelievable really, as would want to comfort that the backup worked, and provide some info on what had transpired. Retrospect does do all this, thats why I was enquiring about using an inf file to start it.
Nevertheless thanks for the suggestion, maybe O&O does do incremental backups and give the info we would wish to see, but as I have no expereince of it; I would either like someone to outline the process, as I would prefer not to waste time trying something that doesn't do what we want. I have explored alternative backup programs, but the info provided is usually too skimpy.0 -
You could get the license key and then use this form without installing it to ask any details for how it works
http://www.oo-software.com/en/support/csupport
This gives some details of the options
http://www.oo-software.com/en/products/ooautobackup/screenshots
I have this so don't use backups as such
http://www.my-ditto.com/html/professional.html0 -
I am trying to run my backup program on my lappie when I insert the external USB hdd. The program in question, Retrospect, sits on my lappie XP SP3 system drive ("E:") and I have the following autorun.inf file on the external USB hdd:
[autorun]
open="E:\Program Files\Retrospect\Retrospect 7.6\retrospect.exe" autoplay=true
ICON="E:\Windows\Installer\{4EBDDD97-BC33-4F4C-8DF3-4FA4D83DF84E}\NewShortcut1_AFF8387BA95848F89E1C2E9485A1985A.exe"
However it isn't working, nor is the usual windows XP "what do you want to do" panel appearing? Which it did before I created the autorun file.
Whats up, what am I missing?
Puzzled?0 -
Hi Robmar0se,
I too have this problem, when I connect my WD external drive. the wee light comes pn and it buzzes away but you can;t tell if it is doing anything.
Did you also use the WD Smartware software?
G0 -
Yes the client did, but because the actual Smartware backup process was distinctly lacking in what it was doing aand when it had finished, we have decided to dump it for something that gives us more confidence that it doing what it is supposed to do.Hi Robmar0se,
Did you also use the WD Smartware software?
G
Hence my question about invoking Retrospect via an autorun.inf file, hoping that someone can give me the benefit of successfully doing this (or something similar), as I have failed abysmally so far!0 -
I see, do let me know if you get any luck please!0
-
Continuing on the same vein, does anyone have expereince of the progarms called "mypendrive" and/or "pstart".
Tried the former bu**ered an external drive, which couldn't subsequently be recognised, until I attached it as a fixed drive (and thus able to remove the inf file). Now I get "windows - No disk" error whenever I try to run the program, even though I uninstalled, booted and reloaded it.
I'm sure there must be folks out there that have wanted to run applications automatically when inserting a removable pen/ext-hdd?0 -
I am trying to run my backup program on my lappie when I insert the external USB hdd. The program in question, Retrospect, sits on my lappie XP SP3 system drive ("E:") and I have the following autorun.inf file on the external USB hdd:
[autorun]
open="E:\Program Files\Retrospect\Retrospect 7.6\retrospect.exe" autoplay=true
ICON="E:\Windows\Installer\{4EBDDD97-BC33-4F4C-8DF3-4FA4D83DF84E}\NewShortcut1_AFF8387BA95848F89E1C2E9485A1985A.exe"
However it isn't working, nor is the usual windows XP "what do you want to do" panel appearing? Which it did before I created the autorun file.
Whats up, what am I missing?
Puzzled?
The reason that your autorun.inf idea is not working, is because Windows associates autorun with ROM drives, so it is effectively being ignored by the OS.
It is possible to fool Windows into auto running a RAM device, by adding a very small partition that mimics a DVD/CD ROM drive, which contains the necessary files to perform whatever action is required.
This technique is commonly used on give away promotional USB flash drives, which typically open your browser, play a video and then connects to the companies website, if an internet connection is detected.
You will achieve your goal if you persevere.:doh: Blue text on this forum usually signifies hyperlinks, so click on them!..:wall:0 -
An update from me, Todd from Western Digital rang me last night at home and installed Go to assist.
He then deleted some corrupted files, reinstelled the WD smartware software and ran the updates.
Works perfectly now. He reckons my problem was that I had tried to run updates without disabling my AV (Kaspersky) This is apparently a well known issue.
Took about 45 minutes and he was very professional and chatty.0
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 356K Banking & Borrowing
- 255K Reduce Debt & Boost Income
- 456.3K Spending & Discounts
- 248.5K Work, Benefits & Business
- 606.2K Mortgages, Homes & Bills
- 179.1K Life & Family
- 264K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.2K Discuss & Feedback
- 37.7K Read-Only Boards