Ready, steady… save!
You don’t need a chart to join in. Here are 2 ways to record your savings:
1. Cross it off
Pop a chart into your first post. Saved an amount? Cross it out! Read more »
£0.01 £0.02 £0.03
2. Write it down
Skip the chart and add updates to your first post. Read more »
“Another +£3 saved today. Go me!”
Use +£ before each new saving so it counts towards your total.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
PC Headphone 'broken off' in laptop
Comments
-
The convention has been around for many many years and is an international standard, so why change it? Surely it's better to educate people not in the know the correct terminology.Wouldn't it be easy if we used the convention to call a Jack Plug "Jack" and a Jack Socket a "Jill"?
Dave0 -
Just call them by their 'uber-technical ' name - male & female sound thingy everyone knows what they are then
Disclaimer : Everything I write on this forum is my opinion. I try to be an even-handed poster and accept that you at times may not agree with these opinions or how I choose to express them, this is not my problem. The Disabled : If years cannot be added to their lives, at least life can be added to their years - Alf Morris - ℜ0 -
A needle with a hook at the end - like a crochet hook - will probably remove the broken piece of the jack.0
-
A totally of-the wall idea - no clue as to whether it'll work - but you could try using a straightened out fish hook (if they do straighten out without snapping). It may be thin enough to push in between the insulation and the contacts of the jack and the barb may get enough grip to pull it out.Never let it get you down... unless it really is as bad as it seems.0
-
If you are good at soldering, very carefully solder a stiff wire to the jack, you should then be able to pull it out. I've done it before on a PC sound card and it worked well. Too much solder and you risk soldering it in permanently!0
-
A dab of superglue on the end of a match stick [or similar] and a steady hand may well work - I've done similar0
-
Or
Thinnest metal drill you can find. Drill out a few mm of the centre of the remains of the jack plug, insert a thin screw into the hole, twist and pull.
Keep a vacuum cleaner nozzle close to the drilling point to hoover up the metal swarf.0
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 356K Banking & Borrowing
- 255K Reduce Debt & Boost Income
- 456.3K Spending & Discounts
- 248.5K Work, Benefits & Business
- 606.2K Mortgages, Homes & Bills
- 179.1K Life & Family
- 264K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.2K Discuss & Feedback
- 37.7K Read-Only Boards