📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Think I have really messed up this time! I need help please

As mentioned in the other post about the dead laptop, I have a very old work programme which comes on floppy discs. I had this installed on the laptop and it worked fine with XP. It won`t load on my desktop as it doesn`t like 64 whatever it is, so yesterday I tried to put it on the HP netbook...everything seemed fine and it seemed to load..then for some strange reason it started asking me for a pass number (I have never had a pass number in all th 12 years I have used it)..so I thought I would uninstall it!:(

Its not showing under programmes, but is showing on local disc `C` I can`t find any way to remove it, I tried restoring the computer to an earlier time but it didn`t work..please does anyone have any ideas how I can uninstall it?

When I mess up I really mess up!! :mad:

Thank you.
«1

Comments

  • scheming_gypsy
    scheming_gypsy Posts: 18,410 Forumite
    you've not messed up.

    When it's started installing it's asked for a serial number, but because you didn't have it, it might not have finished installing - hence no menu for it, but it had created a folder for it.

    If you go into start menu > settings > control panel > add remove programmes... you can uninstall it from there. If it doesn't show there then there's nothing to uninstall and you can just delete the folder from c:\program files
  • Find it on c drive,right click,click open file location,right click on file,click delete.
    When you used system restore,did you take it back to before you installed the program.Good luck.
  • katies_mum
    katies_mum Posts: 2,408
    Part of the Furniture 1,000 Posts
    Forumite
    Thank you both for replying.
    When I click on local disc C it shows the program date modified and file folder. If I click on that I get it opening into 12 different named bits all in a list. If I delete the main heading or the different bits it just asks me if I want them to go in the recyle bin (so is that not really getting rid of it?) if I click on to try and open it I get the message `windows can`t open this file,it need to know what programm you want to use to open it etc..

    System restore - it would only let me go back to yesterday on it (not used the netbook since the summer) so don`t know if it took it back before or after..all I know is there was a big dowload (service pack) to do after the system restore.

    I`m sorry if I`m confusing you...imagine how I feel? I`ve not deleted or done anything yet.
  • Lucero_2
    Lucero_2 Posts: 283
    Part of the Furniture 100 Posts Combo Breaker
    Forumite
    Right click on the folder in C: and hold down Shift, whilst pressing the DEL key. That's a hard delete and bypasses the recycle bin, then, if you want to, install the software again. If it asks for a serial number, and this is work software, perhaps ask your work. They might even have a newer version you can use :)
  • katies_mum
    katies_mum Posts: 2,408
    Part of the Furniture 1,000 Posts
    Forumite
    Its gone, thank you so much.

    This programme was never re-written or updated (I even had to buy a usb floppy disc reader to install it) ..it just makes my life easier by using it so there is no chance of a new version or code from anyone.

    Now I know how to remove it I might have one final go at installing it ... just to see if it will work this time. One think I did notice on the Programs and Features is `Run Programs made for previous versions of Windows` don`t know what this is / means and would it help?

    Also maybe you can help me with something else... as my little netbook doesn`t have a CD/DVD reader would I have to buy a USB one if I want to connect this to my Canon MG5250 printer?

    Many thanks.
  • Do you mean so you can install the software for the printer,if so have a look here http://software.canon-europe.com/products/0010889.asp
  • katies_mum
    katies_mum Posts: 2,408
    Part of the Furniture 1,000 Posts
    Forumite
    Yes, sorrry if it didn`t make sense. I have linked it to the desktop and laptop but needed to use the disc that came with it..does that link mean I don`t need to use the disc?
  • yes,put in your windows operating system,it will give you various options.
  • katies_mum
    katies_mum Posts: 2,408
    Part of the Furniture 1,000 Posts
    Forumite
    Thank you, I`ll have a go at that over the weekend when I have a bit more time.
  • katies_mum
    katies_mum Posts: 2,408
    Part of the Furniture 1,000 Posts
    Forumite
    I`m into the Canon site and trying to download the wireless set up for the printer onto the netbook and I`ve agreed to the licence etc clicked on run it looks like its going to work then the boxes disappear from the screen and it just goes back to the licence and nothing happens. Any ideas please?
This discussion has been closed.
★ ★ ★ Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 356K Banking & Borrowing
  • 255K Reduce Debt & Boost Income
  • 456.3K Spending & Discounts
  • 248.5K Work, Benefits & Business
  • 606.2K Mortgages, Homes & Bills
  • 179.1K Life & Family
  • 264K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.2K Discuss & Feedback
  • 37.7K Read-Only Boards
Quick Search

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.