Ready, steady… save!
You don’t need a chart to join in. Here are 2 ways to record your savings:
1. Cross it off
Pop a chart into your first post. Saved an amount? Cross it out! Read more »
£0.01 £0.02 £0.03
2. Write it down
Skip the chart and add updates to your first post. Read more »
“Another +£3 saved today. Go me!”
Use +£ before each new saving so it counts towards your total.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
BT Infinity (equipment used)
Lil306
Posts: 1,692
Forumite
Does anyone have pictures or a clear understanding of the difference with installation.
I've got the engineer coming out on the 6th to install by fibre optic connection and been told I need two power supplies for the router(s). I was also advised that a new faceplace would be installed
I'm assuming the connection is like this... (btw ADSLR and FOR = ADSL / Fibre Optic Router 1+2)
1 - BT exchange FTC connection to local exchange box
2 - Local exchange box copper wire to BT faceplate
3 - Engineer installs new faceplate (to NTE5 standard or latest)
4 - Engineer runs an ADSL broadband cable to ADSLR1
5 - Engineer runs a fibre optic cable from ADSLR1, to FOR2
6 - Engineer then connects an ethernet cable from FOR2 to home PC for end user
I'm assuming that's what it is, I really don't like people touching my home computer setup but BT are adamant it must be tested. So he's got access to the Guest account and that's it. I'll eventually upgrade / swap out the equipment with something that supports a fibre install since I don't like BT having access to any of my hardware. The less the better
Thankoos for clarification
I've got the engineer coming out on the 6th to install by fibre optic connection and been told I need two power supplies for the router(s). I was also advised that a new faceplace would be installed
I'm assuming the connection is like this... (btw ADSLR and FOR = ADSL / Fibre Optic Router 1+2)
1 - BT exchange FTC connection to local exchange box
2 - Local exchange box copper wire to BT faceplate
3 - Engineer installs new faceplate (to NTE5 standard or latest)
4 - Engineer runs an ADSL broadband cable to ADSLR1
5 - Engineer runs a fibre optic cable from ADSLR1, to FOR2
6 - Engineer then connects an ethernet cable from FOR2 to home PC for end user
I'm assuming that's what it is, I really don't like people touching my home computer setup but BT are adamant it must be tested. So he's got access to the Guest account and that's it. I'll eventually upgrade / swap out the equipment with something that supports a fibre install since I don't like BT having access to any of my hardware. The less the better
Thankoos for clarification
Owner of andrewhope.co.uk, hate cars and love them
Working towards DFD
HSBC Credit Card - £2700 / £7500
AA Loans - (cleared £9700)
Working towards DFD
HSBC Credit Card - £2700 / £7500
AA Loans - (cleared £9700)
0
Comments
-
All looks fairly straight foreward.
http://www.productsandservices.bt.com/consumerProducts/displayTopic.do?topicId=29023
Just delete your internet history if you are worried.:DThat gum you like is coming back in style.0 -
All looks fairly straight foreward.
http://www.productsandservices.bt.com/consumerProducts/displayTopic.do?topicId=29023
Just delete your internet history if you are worried.:D
Doh!
I was actually trying to find something on their website showing everything required.
I'm still not letting em on my account, they can use the laptop. That's full of crap so not worried about that
Owner of andrewhope.co.uk, hate cars and love them
Working towards DFD
HSBC Credit Card - £2700 / £7500
AA Loans - (cleared £9700)0 -
Don't worry about them messing about with your computer. When they came to sort out infinity at my place, all the guy did was:
- call to tell me he was connecting stuff at the cabinet end and that therefore I would lose my line while he was doing that and that he'd be round a few minutes later to finish the install
- change the faceplate (as I had a 20+ year old one)
- connect faceplate to modem and modem to router
- connect router to computer (with cable) and told me to check the speed with speedtest.net - he didn't even touch my computer!
- left
Took less than 30 minutes in all, he didn't even mention installing carp BT software or anything
Now free from the incompetence of vodafail0 -
Don't worry about them messing about with your computer. When they came to sort out infinity at my place, all the guy did was:
- call to tell me he was connecting stuff at the cabinet end and that therefore I would lose my line while he was doing that and that he'd be round a few minutes later to finish the install
- change the faceplate (as I had a 20+ year old one)
- connect faceplate to modem and modem to router
- connect router to computer (with cable) and told me to check the speed with speedtest.net
- left
Took less than 30 minutes in all, he didn't even mention installing carp BT software or anything
Thanks, hopefully he'll come around when I finish work then that way I can check it myself.
I'm guessing he'll probably come early since it's a Friday and close to home time
No change of me installing any BT software, it's a perfectly symbiotic relationship. They provide the internet, I do my own tech support. Soon as they do the tech support I always end up with problems. I've worked that way for many years and only have to call them when they've done something to lines.
Their website reports I can get 29.9 and 10mb up currently on 4.5 and 1mb so should be better for increasing speed of my youtube videos
Owner of andrewhope.co.uk, hate cars and love them
Working towards DFD
HSBC Credit Card - £2700 / £7500
AA Loans - (cleared £9700)0 -
They speed estimate is actually pretty accurate
though I'm too far from the shiny green cabinet to get more than 25mb download, it's a hell of a lot better than the previous long and winding connection over the copper wires to a congested exchange where I could only get between 0.5 to 1mb download (yes, I'm in London :rotfl: ) Now free from the incompetence of vodafail0 -
They speed estimate is actually pretty accurate
though I'm too far from the shiny green cabinet to get more than 25mb download, it's a hell of a lot better than the previous long and winding connection over the copper wires to a congested exchange where I could only get between 0.5 to 1mb download (yes, I'm in London :rotfl: )
Damn that is congested, I get faster than that with mobile broadband :eek:Owner of andrewhope.co.uk, hate cars and love them
Working towards DFD
HSBC Credit Card - £2700 / £7500
AA Loans - (cleared £9700)0 -
You can say that again :rotfl: I'm a long way from the exchange as well which doesn't help - so when I got the BT flyer through the letterbox back in April saying Infinity was available, I jumped on it straightaway

It is just *so* nice to be able to use the net without things taking forever!Now free from the incompetence of vodafail0 -
I got inifinity installed a few weeks ago. The Installer was absolutely first rate.
the kit comprises of:
A new face plate
A modem which plugs into the new face plate with a data cable (cat 5 - They have the cable and crimp connectors on it), and requires a plug point for its power supply.
A Cat 5 cable from modem to BT Homehub. .
The BT Homehub. This also requires a powerpoint.
Basically, my installer came, he looked at what we have and what we wanted. He bypassed the original master socket on the ground floor, and made a first floor socket the master socket with it's new faceplate. He ran the Cat 5 from the first floor to the attic (I knew a good existing routing) and installed the modem up there, and then just used a short run of cat 5 from Modem to Homehub.
He then went off to the cabinet and connected me up to infinity. He phoned me to check on the homehub, and it connected instantly. then he phoned for a line test that showed we'd be getting 8Mb up and 36Mb down. I ran speedtest and that's what it showed. He plugged a handset tool into the modem and re-ran the test which tallied perfectly with the line test.
I've been up and running at that speed ever since, and 21ms ping with 1ms jitter.
he showed absolutely no interest in my computers, I just put in the new Wi-fi info and it connected, PS3 and Xbox in the attic just got Cat 5'd to the homehub and worked straight off. I said "I'm not installing any BT software" and he said "No, I wouldn't recommend it if you know what you're doing".
So you need not fear, your 14Tb "Artistic video" collection will remain un-molested. Except by you.
You're quite right - The Fibre stops at the cabinet and will ALWAYS give 40Mb/s (80Mb/s next year) after that it's down to the quality and distance of the "copper" cable to your home, and critically within your home. Ideally they'll bang the faceplate into the first point of contact to your house, and do everythign with the data cable after that. However, in my home this wasn't possible due to phone positioning, but it's not cost us anything. Thye estimated me 20Mb/s, the connection is twice that.0 -
I'm with bt and I'm really happy with it.
http://www.speedtest.net/result/1682536819.png this is my speed and that's with two other people sharing it and my other two sons have their own connection with virgin.I'm not poor i'm just skint0 -
I'm assuming that's what it is, I really don't like people touching my home computer setup but BT are adamant it must be tested.
I'd guess that they put that in 'up front' just in case there is a problem and the customer is not a fully paid up member of MSE techie section.
Move along, nothing to see.0
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 356K Banking & Borrowing
- 255K Reduce Debt & Boost Income
- 456.3K Spending & Discounts
- 248.5K Work, Benefits & Business
- 606.2K Mortgages, Homes & Bills
- 179.1K Life & Family
- 264K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.2K Discuss & Feedback
- 37.7K Read-Only Boards
