Fitting a dishwasher, help appreciated

Steve_the_fitter

glad you have found an easy solution. You just need to find all the screws attaching the drawer pack to the worktop and other carcasses. you should be able to see any screw going into the worktop. The screws attaching the drawer pack to the other cabinets will probably be hidden behind the hinge plates and where the shelf sits etc. You will probably find its attached to wall as well. The neatest way to do this is to drill a hole in the back of the cabinet 20mmodd down from the worktop and 20mmodd in from the side of the cabinet. USe a 15mm or 20mm drill bit. Hopefully this will allow you to undo the screws if it is attached. Lower all the legs on the drawer pack before removing it to make sure you have removed all the screws. If it doesnt come out pretty easily you have missed a screw or 2

Ionkontrol

ikati5 wrote: »

I know that sounds like a complete faff and it was when we only had one place for plumbing but not nearly as much of a faff as washing up!!!

Failing that you can buy an on the counter dishwasher for less than £100.

Jeeez, where do I start.....?