We’d like to remind Forumites to please avoid political debate on the Forum.

This is to keep it a safe and useful space for MoneySaving discussions. Threads that are – or become – political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.

📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
The Forum now has a brand new text editor, adding a bunch of handy features to use when creating posts. Read more in our how-to guide

Heating while away

What settings and how ofter would you select your heating to come on while you are away in the winter?

I can only set the boiler to come on at certain times. Select one temp on my rom thermstat and manually control the radiators.

Comments

  • Depends how long you are away for, and how well your pipes are lagged.
  • penrhyn
    penrhyn Posts: 15,215 Forumite
    Part of the Furniture Combo Breaker
    Set the room stat to 5 degrees, if you have tanks in the loft leave the hatch open a little, set the heating to be on continuously.
    That gum you like is coming back in style.
  • HappyMJ
    HappyMJ Posts: 21,115 Forumite
    10,000 Posts Combo Breaker
    lovemilk wrote: »
    What settings and how ofter would you select your heating to come on while you are away in the winter?

    I can only set the boiler to come on at certain times. Select one temp on my rom thermstat and manually control the radiators.
    I would turn everything as low as it can go. Turn the thermostat right down and turn each radiator down to the frost setting or off. I would time the heating to come on for a few hours in the evening and if it's going to snow and be very cold i.e less than zero during the day then turn it on 24/7.

    Personally though if away for more than a week then I'd just turn everything off including the cold water mains tap and turn on the mini oil filled electric radiator on it's lowest setting and put it in the kitchen to keep the cold water mains pipe unfrozen. You only need to then keep just the cold water mains pipe just above freezing and open the remainder of the taps to let some water through.
    :footie:
    :p Regular savers earn 6% interest (HSBC, First Direct, M&S) :p Loans cost 2.9% per year (Nationwide) = FREE money. :p
  • Cardew
    Cardew Posts: 29,064 Forumite
    Part of the Furniture 10,000 Posts Name Dropper Rampant Recycler
    Agree with the above, set the thermostat really low 5C or 10C and have the heating on 24/7.

    I have an annex that is rarely used(no cavity walls) and even through the very coldest periods last winter it was fine and used very little gas.
  • tim9966
    tim9966 Posts: 496 Forumite
    Part of the Furniture 100 Posts
    I was away for a couple of days last week. Mine was set at 7C and doesn't appear to have needed to cut in. It was 9C inside when I got home.
  • macman
    macman Posts: 53,129 Forumite
    Part of the Furniture 10,000 Posts Name Dropper
    A modern boiler or programmer will have a frost stat fitted that will cut in anyway, the default setting is usually 5C on the CH flow circuit.
    No free lunch, and no free laptop ;)
  • I never thought to turn the heating this low to be honest. I have got a bit of mould at the mo that needs to be sorted in the New Year. Would you really turn the heating off/low/on frost control? Won't this promote damp and create cold??

    Thank you ever so much
  • Cardew
    Cardew Posts: 29,064 Forumite
    Part of the Furniture 10,000 Posts Name Dropper Rampant Recycler
    lovemilk wrote: »
    I never thought to turn the heating this low to be honest. I have got a bit of mould at the mo that needs to be sorted in the New Year. Would you really turn the heating off/low/on frost control? Won't this promote damp and create cold??

    Thank you ever so much

    Dampness isn't a function of the house getting cold.

    If you have mould it is a ventlation problem. Mould is a far bigger problem in tropical climates where the room can get to 30C.

    There is no reason why a properly ventilated house couldn't be left to go to minus 20c without mould appearing(obviously all water must be drained). i.e. the cold doesn't promote dampness. - did you see the recent video of Scott of the Antartic's base camp building? It is 100 years old, unheated and no sign of damp.
  • HappyMJ
    HappyMJ Posts: 21,115 Forumite
    10,000 Posts Combo Breaker
    lovemilk wrote: »
    I never thought to turn the heating this low to be honest. I have got a bit of mould at the mo that needs to be sorted in the New Year. Would you really turn the heating off/low/on frost control? Won't this promote damp and create cold??

    Thank you ever so much
    The damp has to come from somewhere and it's usually from the occupants showering, bathing, cooking and just being in the house. Ventilation will reduce damp so if the windows have vents then open them all up and whenever bathing or cooking put the exhaust fan on.
    :footie:
    :p Regular savers earn 6% interest (HSBC, First Direct, M&S) :p Loans cost 2.9% per year (Nationwide) = FREE money. :p
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 353.6K Banking & Borrowing
  • 254.2K Reduce Debt & Boost Income
  • 455.1K Spending & Discounts
  • 246.7K Work, Benefits & Business
  • 603K Mortgages, Homes & Bills
  • 178.1K Life & Family
  • 260.7K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16K Discuss & Feedback
  • 37.7K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.