Ready, steady… save!
You don’t need a chart to join in. Here are 2 ways to record your savings:
1. Cross it off
Pop a chart into your first post. Saved an amount? Cross it out! Read more »
£0.01 £0.02 £0.03
2. Write it down
Skip the chart and add updates to your first post. Read more »
“Another +£3 saved today. Go me!”
Use +£ before each new saving so it counts towards your total.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
I think my printer has died? Need advice
K9cuddles
Posts: 2,202 Forumite
in Techie Stuff
Hi,
My trusty Epson Sytlus CX3200 seems to have broken.
The paper feed roller moves but doesn't acutally pull any paper through! Is this an easy fix? Or would it be cheaper to by a replacement?
If the latter whats the best MSE multi printer about? I love my scan, print and copy facility plus I like the borderless printing too!
Any advice would be super!!
My trusty Epson Sytlus CX3200 seems to have broken.
The paper feed roller moves but doesn't acutally pull any paper through! Is this an easy fix? Or would it be cheaper to by a replacement?
If the latter whats the best MSE multi printer about? I love my scan, print and copy facility plus I like the borderless printing too!
Any advice would be super!!
Official DFW Nerd Club - Member no. 092
::£2 - CSC - Terramundi is filling up!! :: Joined 3/3/06 :: 5/2/07 - 835kg + £280 Banked!!::
::5p,10p & 20p - Savings Tin :: Founded 9/4/06 :: 23/3/07 - 3.2kg ::
Lost to date - 9kg (22/8/06) Next weigh in 2007!!
::£2 - CSC - Terramundi is filling up!! :: Joined 3/3/06 :: 5/2/07 - 835kg + £280 Banked!!::
::5p,10p & 20p - Savings Tin :: Founded 9/4/06 :: 23/3/07 - 3.2kg ::
Lost to date - 9kg (22/8/06) Next weigh in 2007!!
0
Comments
-
Does it take it through if your forcing it while its rolling? Can you even hear it trying to take paper in?
Is it still under warranty? etc...[FONT=Arial, Helvetica, sans-serif]"The internet is a great way to get on the net."
- Bob Dole, Republican presidential candidate[/FONT]0 -
Nope it's not under warranty.. I had one before and that broken (can't remember what now!!) so I brought this replacement off ebay 2nd hand.
Yes the rollers are spinning but even if I push the paper down abit it doesn't take it. There's a flap I'm not sure if that's stuck the wrong way? I've not paid any attention previously!!! but I tried pushing the flap down and it made not difference.Official DFW Nerd Club - Member no. 092
::£2 - CSC - Terramundi is filling up!! :: Joined 3/3/06 :: 5/2/07 - 835kg + £280 Banked!!::
::5p,10p & 20p - Savings Tin :: Founded 9/4/06 :: 23/3/07 - 3.2kg ::
Lost to date - 9kg (22/8/06) Next weigh in 2007!!0 -
Oh the error message is that there is a paper jam, the bit of paper it took was wonky but it still printed on it so I cancelled the print and pulled it out. it didn't rip so there shouldn't be any paper left in the printer.Official DFW Nerd Club - Member no. 092
::£2 - CSC - Terramundi is filling up!! :: Joined 3/3/06 :: 5/2/07 - 835kg + £280 Banked!!::
::5p,10p & 20p - Savings Tin :: Founded 9/4/06 :: 23/3/07 - 3.2kg ::
Lost to date - 9kg (22/8/06) Next weigh in 2007!!0 -
Don't know this printer, but it sounds like a jammed switch.
If you take a look where the paper is pulled in there's pproably a little plastic leaver that is attached to a microswitch and is pushed up by the paper (it doesn't take much).0
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 355.9K Banking & Borrowing
- 255K Reduce Debt & Boost Income
- 456.2K Spending & Discounts
- 248.4K Work, Benefits & Business
- 606.1K Mortgages, Homes & Bills
- 179.1K Life & Family
- 263.9K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.2K Discuss & Feedback
- 37.7K Read-Only Boards