Cannot ping or connect to device on wifi network?

bigfreddiel

I can see my printserver on my wireless router WGPS606 is its hostname.

My Home Network


Devices currently connected to your BT Home Hub:Wireless network:asuseeepc WGPS606 Ethernet:No devices detected USB:No devices detected

I can see from the log its ip address:
16:07:38, 18 Sep.(462356.100000) Lease for IP 192.168.1.70 renewed by host WGPS606 (MAC 00:18:4d:c0:8c:d7). Lease duration: 1440 min
16:07:38, 18 Sep.(462356.090000) Lease requested
And when I ping it i get:
ping 192.168.1.70
PING 192.168.1.70 (192.168.1.70) 56(84) bytes of data.
From 192.168.1.65 icmp_seq=2 Destination Host Unreachable
From 192.168.1.65 icmp_seq=3 Destination Host Unreachable
From 192.168.1.65 icmp_seq=4 Destination Host Unreachable
^C
--- 192.168.1.70 ping statistics ---
5 packets transmitted, 0 received, +3 errors, 100% packet loss, time 4001ms
, pipe 3
jekesse@asuseeepc:~$ ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:1f:c6:62:93:29
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:1
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 TX bytes:0 (0.0
Memory:fbfc0000-fc000000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:66 errors:0 dropped:0 overruns:0 frame:0
TX packets:66 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6470 (6.4 KB) TX bytes:6470 (6.4 KB)

wlan0 Link encap:Ethernet HWaddr 00:15:af:9f:bf:83
inet addr:192.168.1.65 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::215:afff:fe9f:bf83/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:11502 errors:0 dropped:0 overruns:0 frame:0
TX packets:10427 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:10298530 (10.2 MB) TX bytes:1904393 (1.9 MB)
Not sure what to do next - so any help would be good - cheers fj

free4440273

needs a bit more elaboration ... u can't see the print server ? is that it ?

leemoss

As free4440273 said, a little more info would be useful.
What are you using as your print server? Have you had it working previously?