Ready, steady… save!
You don’t need a chart to join in. Here are 2 ways to record your savings:
1. Cross it off
Pop a chart into your first post. Saved an amount? Cross it out! Read more »
£0.01 £0.02 £0.03
2. Write it down
Skip the chart and add updates to your first post. Read more »
“Another +£3 saved today. Go me!”
Use +£ before each new saving so it counts towards your total.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
Please help before I cry
Comments
-
Alright scouse.
Basically you've set the speed to a lower setting. Won't make any difference if the wireless devices you have are not 'Wifi N', but its not ideal, really you want to keep it at the higher setting.
What are the other options you have in that drop down? Is there N/G/B?
Not seen you on GIOL for a while either!
Hey jay.
How's tricks?
What's wifi n? :undecided
My options are, up to 65mbps, up to 150mbps, and g&b.0 -
wifi is graded as 801.11b, g or n. This relates to the speed of the data transfer between router and wifi devices (like the wifi card in your lappy).
b operates at 11mbps, g at 56mbps, and n up to around 150mbps*
newer (faster) devices are normally backward-compatible with the previous standards, but it's no good if your router is set to the faster modes only and your wifi cards aren't capable of handling it
*depends on the manufacturer and other factors, but should be around 150......Gettin' There, Wherever There is......
I have a dodgy "i" key, so ignore spelling errors due to "i" issues, ...I blame Apple
0 -
wifi is graded as 801.11b, g or n. This relates to the speed of the data transfer between router and wifi devices (like the wifi card in your lappy).
b operates at 11mbps, g at 56mbps, and n up to around 150mbps*
newer (faster) devices are normally backward-compatible with the previous standards, but it's no good if your router is set to the faster modes only and your wifi cards aren't capable of handling it
*depends on the manufacturer and other factors, but should be around 150
So is it a case that my hardware can only go at the lower speeds? Or is it a setting thing?
Also yesterday, I lost the connection a couple of times which was only fixed by turning the router off for a while. When the connection dropped I couldn't even see the router in the wireless connection thing. Was definitely in range. Just dropped and wouldn't see the router. :undecided0 -
Still losing connection every so often. And some sites think I'm accessing from a mobile. :undecided0
-
please be more specific - it it the INTERNET connection dropping, or the WIFI connection ?? If the 'net, is the router losing sync? - go into the router and look for the uptime readings, that'll give you a clue
......Gettin' There, Wherever There is......
I have a dodgy "i" key, so ignore spelling errors due to "i" issues, ...I blame Apple
0 -
please be more specific - it it the INTERNET connection dropping, or the WIFI connection ?? If the 'net, is the router losing sync? - go into the router and look for the uptime readings, that'll give you a clue

Sorry, the wifi connection is dropping.
I'm not too tech minded as you can tell. :rotfl: 0 -
have you updated the wifi card (in the lappy) drivers yet ?? If not, that'd be the next move. Also, remove and re-seat it in it's socket. If, after both of these steps, there's no improvement, I'd look on ebay for a new wifi card for the lappy....will only be a few quid.......Gettin' There, Wherever There is......
I have a dodgy "i" key, so ignore spelling errors due to "i" issues, ...I blame Apple
0
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 355.9K Banking & Borrowing
- 255K Reduce Debt & Boost Income
- 456.2K Spending & Discounts
- 248.4K Work, Benefits & Business
- 606.1K Mortgages, Homes & Bills
- 179K Life & Family
- 263.9K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.2K Discuss & Feedback
- 37.7K Read-Only Boards
