Load bearing bay window?

Hi all.

Im in the middle of replacing the windows in my home and the time has come to order a replacement bay. I would like someone who has experience with double glazing installs to pls advise me on whether this is classed as a load bearing bay? I dont think it is but I would like some other opinions pls.

Thanks in advance:money::money:

http://s1087.photobucket.com/albums/j472/looly2/?action=view&current=IMG_1776.jpg
«1

Comments

  • akitabow
    akitabow Posts: 89 Forumite
    To me I would say it is not a load bearing bay however from the picture I am not 100% because you do not show if the bay has a lintel above or how the canopy is supported. The bay is very similar to mine so I would suggest the use of props to hold the top up while you replace them. You will need poles to connect the windows anyway so to be safe why not have them made with a mechanism that jacks up the top of the bay. Better be safe than sorry. If you're using a proper company to install them then they should be able to tell you.
    " When life keeps trying to let you down just remember you are not full of hot air so cannot be deflated"
  • ormus
    ormus Posts: 42,714 Forumite
    very unlikely. the porch canopy seems top be supported by its own braces.
    Get some gorm.
  • PasturesNew
    PasturesNew Posts: 70,698 Forumite
    Part of the Furniture 10,000 Posts Name Dropper Photogenic
    It doesn't look it to me. If you look where the bay joins the wall, the bricks go behind the bay, which to me looks like it's a supported open gap in the wall, with a bay bunged on the front.
  • birkee
    birkee Posts: 1,933 Forumite
    It's not a real bay window, but a square aperture in the house wall, with it's own lintel and a bay like window attached to the wall.
    A load bearing bay, would almost certainly be accompanied by a bay window upstairs too, which is when and why it becomes 'load bearing'.
  • The main braces are supporting the weight so i wouldn't worry.

    I have a canopy above my door and the braces support the weight.

    The canopy should support its own on not rely on the bay window.

    I also notice you have some supports under it but i think that's just a feature.
    I'm not poor i'm just skint
  • taffyapple
    taffyapple Posts: 25 Forumite
    Thank you all for your opinions. Very much appreciated :)
  • copier_guy
    copier_guy Posts: 507 Forumite
    looks like it was snowing in that pic?
  • ormus
    ormus Posts: 42,714 Forumite
    2gww9s6.jpg

    as above, a typical bay window is not load bearing in the normal sense.
    hence why they tend to have a wooden frame/studs and drop tiles above the ground floor bay.
    not much weight there.

    (as per my own house).
    Get some gorm.
  • taffyapple
    taffyapple Posts: 25 Forumite
    copier_guy wrote: »
    looks like it was snowing in that pic?
    lol...it's was rain. Mind you, here in Wales we get rain the size of snowballs !!!:rotfl:
  • birkee
    birkee Posts: 1,933 Forumite
    ormus wrote: »
    2gww9s6.jpg

    as above, a typical bay window is not load bearing in the normal sense.
    hence why they tend to have a wooden frame/studs and drop tiles above the ground floor bay.
    not much weight there.

    (as per my own house).

    Then what supports the upper bay window and the apex above it?
    Or have I misread your post?
    The picture definately shows a load bearing bay window.
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 349.8K Banking & Borrowing
  • 252.6K Reduce Debt & Boost Income
  • 453K Spending & Discounts
  • 242.8K Work, Benefits & Business
  • 619.6K Mortgages, Homes & Bills
  • 176.4K Life & Family
  • 255.7K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 15.1K Coronavirus Support Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.