We’d like to remind Forumites to please avoid political debate on the Forum.

This is to keep it a safe and useful space for MoneySaving discussions. Threads that are – or become – political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.

📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Treating Oak work surfaces

Hi There.

Ive just had solid oak worktops put in and I just trying to find out what oil to treat it with? Two suggestions have been Tung Oil or Sadolin Oil. Has anyone tried either of these?

Cheers in Advance

Comments

  • http://www.amazon.co.uk/s/?ie=UTF8&keywords=rustin+danish+oil&!!!!!mh0a9-21&index=aps&hvadid=461661144&ref=pd_sl_6w7ilp01a0_e

    This is the stuff i normally use


    Farmerbob wrote: »
    Hi There.

    Ive just had solid oak worktops put in and I just trying to find out what oil to treat it with? Two suggestions have been Tung Oil or Sadolin Oil. Has anyone tried either of these?

    Cheers in Advance
  • shar46y
    shar46y Posts: 249 Forumite
    Oak worktops in our previous place were from IKEA, we just bought the oil from IKEA too (can't remember the name of it, but it was sold in the kitchen department next to the worktop displays). Think it cost only £5 per tin.
  • Russe11
    Russe11 Posts: 1,198 Forumite
    Tung oil is the most expensive

    Rustins danish oil tends to be quite a "dirty" mix somtimes(it can vary a lot in quality)... you could get a refined danish oil, but daish oil tend to yellow the oak to much for some people liking.

    Osmo do food safe oils, blended from organic and veg oils, applied thinley it does not require sanding between coats.
  • keystone
    keystone Posts: 10,916 Forumite
    Farmerbob wrote: »
    Ive just had solid oak worktops put in and I just trying to find out what oil to treat it with?
    What does the worktop manufacurer say you should use? Or is that too logical?

    Cheers
    The difference between genius and stupidity is that genius has it's limits. - Einstein
  • Canucklehead
    Canucklehead Posts: 6,254 Forumite
    Also recommend Osmo...brilliant products which we have used many times.

    Canucklehead
    Ask to see CIPHE (Chartered Institute of Plumbing & Heating Engineering)
  • Farmerbob
    Farmerbob Posts: 234 Forumite
    Part of the Furniture 100 Posts Combo Breaker
    The work top is from Ikea, but the Ikea product it water based so im looking for a oil based treatment as it will hopefully repel the water better, stains etc

    Cheers for the suggestions will check then out
  • Norman_Castle
    Norman_Castle Posts: 11,871 Forumite
    Part of the Furniture 10,000 Posts Photogenic Name Dropper
    Liberon Finishing Oil
  • keystone
    keystone Posts: 10,916 Forumite
    Farmerbob wrote: »
    The work top is from Ikea, but the Ikea product it water based so im looking for a oil based treatment as it will hopefully repel the water better, stains etc

    Cheers for the suggestions will check then out
    Behandla isn't water based.

    Cheers
    The difference between genius and stupidity is that genius has it's limits. - Einstein
  • shar46y
    shar46y Posts: 249 Forumite
    Farmerbob wrote: »
    The work top is from Ikea, but the Ikea product it water based so im looking for a oil based treatment as it will hopefully repel the water better, stains etc

    Cheers for the suggestions will check then out

    Think it is an emulsion. It seemed pretty d**m oily to me when I was putting it on!:D

    When we first had the worktops installed, I lovingly oiled them very frequently as per the instructions - might have been every day (!) can't remember exactly. After the initial set of treatments, we only needed to oil every 6 months - 1 year and never had a problem with water or stains. Cleaning was always only with a damp E-cloth and the worktop looked beautiful!

    A word of warning - don't let visitors or husbands put dirty dishes covered in washing up suds on the worktops :mad:as the detergent will mess up the oiled finish and let water soak in! Then you have to re-oil the damaged areas.
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 352.5K Banking & Borrowing
  • 253.7K Reduce Debt & Boost Income
  • 454.5K Spending & Discounts
  • 245.5K Work, Benefits & Business
  • 601.4K Mortgages, Homes & Bills
  • 177.6K Life & Family
  • 259.4K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16K Discuss & Feedback
  • 37.7K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.