nissan almera selt belt light flashing

joseph1972
joseph1972 Posts: 23 Forumite
Tenth Anniversary 10 Posts Name Dropper Combo Breaker
car failed mot on a seat belt so i went and got another one and fitted it
now tho i have a constant flashing light will this fail on my re test???

on another note it failed on a tyre that had a split in it so again got it changed had a look and guess what no split at all no cracks or anything should i get t/s involved it was from a high street tyre and exhaust center in stockport?

Comments

  • BM-AK
    BM-AK Posts: 105 Forumite
    Part of the Furniture 10 Posts Combo Breaker
    I'm not sure if the constant flashing seatbelt light is going to fail the MOT or not.

    I would guess no as its not an airbag light or something which is preventing the seatbelt doing its thing.

    If the flashing light wasn't there before, I presume its a sensor on whatever you've went and replaced. Look for a sensor - you may be able to swap them over from your old faulty one and solve the problem. Failing that it may be something registered in the ECU, in which case you may need a garage to get it on a diagnostic computer and get it reset.

    If you feel the tyre wasn't split despite the MOT test station saying so, I'd go back and ask them to show you exactly where its split, just for reference. Give them a chance to prove before looking into reporting them.

    I always ask my MOT station to show any damage to me if there are areas of concern/fail points. This covers their back and assures you that the problem is indeed there.
  • joseph1972
    joseph1972 Posts: 23 Forumite
    Tenth Anniversary 10 Posts Name Dropper Combo Breaker
    thanks for the reply the light was actually the air bag light how ever there is a fix i found on u tube u turn the ignition of in a sequence four times and it resolves it
    regards
  • rodenal
    rodenal Posts: 831 Forumite
    With regards to your tyre, I wouldn't be too hasty in assuming the mot station are trying to rip you off, unless you know what you are looking for and the tyre is on said wheel and inflated when being inspected you may well just not see the damage, especially if it was on the inside of the wheel.
  • joseph1972 wrote: »
    car failed mot on a seat belt so i went and got another one and fitted it
    now tho i have a constant flashing light will this fail on my re test???

    on another note it failed on a tyre that had a split in it so again got it changed had a look and guess what no split at all no cracks or anything should i get t/s involved it was from a high street tyre and exhaust center in stockport?

    You really should have asked the people who tested the car to show you where the split was or got them to put a crayon mark round it.
    Was the tyre replaced by the company who did the MOT?
    If not you will have difficulty proving the tyre you say has no split actually came of your car
    Once the car leaves the MOT station and you don't have evidence you don't really have a leg to stand on.:(
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 349.7K Banking & Borrowing
  • 252.6K Reduce Debt & Boost Income
  • 452.9K Spending & Discounts
  • 242.7K Work, Benefits & Business
  • 619.4K Mortgages, Homes & Bills
  • 176.3K Life & Family
  • 255.6K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 15.1K Coronavirus Support Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.