We’d like to remind Forumites to please avoid political debate on the Forum.

This is to keep it a safe and useful space for MoneySaving discussions. Threads that are – or become – political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.

📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Cutting in - paintwork help and advice with how to fix problems

Hi all

I have done a quick search and can not seem to come up with much that helps me...

I am painting my sons room. One wall blue and 3 walls grey (as per his request) on top of magnolia. Have opted for silk so I can clean it. Thing is it is really blue! I have not done a good job of cutting in - To be fair it isn't bad it is not perfect if you like and I feel that it sticks out more because it is blue. ALthough the paint on the skirting is ageing I wasn't going to reapaint that as I don't feel I have the necessary skills.

I think my brush may have been too small 1/2 inch as I thought a smaller brush would give me better control...

I have a bit of paint on the skirting. How easy is that to remove once it is dry? What about the ceiling? Should I have painted that as well or do you think I can just touch it up with a brush?

The ceiing isn't that bad but there are som large bits of magnolia on there where someone slipped with the roller last time and were never sorted. Do you think it will show up more if I just touch up? Its four years since it was painted...

Would really appreciate some advice on this one before I start the other three walls. This will be a slow project for me as I have to do things much slower than the average person. I am hoping to finish the blue today get him back in his room for a few days then commence the grey when I have a bit of time.

Thanks in advance

Jo
«1

Comments

  • Mrs_Arcanum
    Mrs_Arcanum Posts: 23,976 Forumite
    Part of the Furniture 10,000 Posts Name Dropper Photogenic
    A bigger brush held sideways is better for cutting in. Alternatively get a "George" it is a tool you paint against to get straight edges. Gloss work should be done first then the ceiling downwards. You will need to do the whole ceiling as a touch up after 4 years will show.

    As for removing the emulsion it may take a scrub but it should come off.
    Truth always poses doubts & questions. Only lies are 100% believable, because they don't need to justify reality. - Carlos Ruiz Zafon, The Labyrinth of the Spirits
  • Inactive
    Inactive Posts: 14,509 Forumite
    A bigger brush held sideways is better for cutting in. Alternatively get a "George" it is a tool you paint against to get straight edges. Gloss work should be done first then the ceiling downwards. You will need to do the whole ceiling as a touch up after 4 years will show.

    As for removing the emulsion it may take a scrub but it should come off.

    Really?...I always do ceiling, then walls, then gloss.
  • Barneysmom
    Barneysmom Posts: 10,136 Ambassador
    Part of the Furniture 1,000 Posts Photogenic Combo Breaker
    edited 6 March 2011 at 3:46PM
    Gloss always first, it's easier to remove paint splashes from gloss, than get gloss paint splashes/slips off emulsion.

    Op satin paint is much easier to use on skirting boards than gloss if you're a beginner, we used it in our bathroom and it hasn't needed any touching up for about 5 years, and it doesn't smell bad.
    I’m a Forum Ambassador and I support the Forum Team on the Old style MoneySaving boards.
     If you need any help on these boards, please let me know.
     Please report any posts you spot that are in breach of the Forum Rules by using the Report button, or by e-mailing forumteam@moneysavingexpert.com.
     All views are my own and not of MoneySavingExpert.com
  • Mummy_Jo
    Mummy_Jo Posts: 496 Forumite
    Part of the Furniture Combo Breaker
    I wasn't planning on doing the gloss at all if I can help it!:D Too much for my wee brain to take on right now. Want to be able to walk before I can run...

    If I do the ceiling next then fix the blue wall and then the other three grey ones... It is artexed. Can I use a roller or will I have to use a brush?

    Thanks for the replies so far...
  • Inactive
    Inactive Posts: 14,509 Forumite
    Barneysmom wrote: »
    Gloss always first, it's easier to remove paint splashes from gloss, than get gloss paint splashes/slips off emulsion.

    I don't get emulsion on gloss, or gloss on emulsion.

    So I will just carry on doing things my way.:)
  • Inactive
    Inactive Posts: 14,509 Forumite
    Mummy_Jo wrote: »
    I wasn't planning on doing the gloss at all if I can help it!:D Too much for my wee brain to take on right now. Want to be able to walk before I can run...

    If I do the ceiling next then fix the blue wall and then the other three grey ones... It is artexed. Can I use a roller or will I have to use a brush?

    Thanks for the replies so far...

    Better using a roller on artex.
  • ormus
    ormus Posts: 42,714 Forumite
    ceilings first.
    if painting the walls, then do the the woodwork last.
    if wallpapering then paper last.

    best to use a 2 inch brush for cutting in, on woodwork.
    Get some gorm.
  • phill99
    phill99 Posts: 9,093 Forumite
    Part of the Furniture 1,000 Posts
    The professionals I use normally put a coat on the ceiling, then while that is drying do a coat of undercoat the woodwork. Then second coat the ceiling, second undercoat on the woodwork, walls (2 or more coats) and then gloss last.
    Eat vegetables and fear no creditors, rather than eat duck and hide.
  • cajef
    cajef Posts: 6,283 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Photogenic
    Barneysmom wrote: »
    Gloss always first, it's easier to remove paint splashes from gloss, than get gloss paint splashes/slips off emulsion.

    You must throw the paint about a lot, I don't normally get splashes of gloss paint on ceilings and walls when I am painting doors and skirtings.:p
  • thescouselander
    thescouselander Posts: 5,547 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Combo Breaker
    I find these things to be the dogs danglies when it comes to cutting in.

    http://www.diy.com/diy/jsp/bq/nav.jsp?isSearch=true&fh_search=detail+pad&x=0&y=0


    They're really good for doing the edges when you've got a feature wall too - you get much better control compared with a brush.
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 352.3K Banking & Borrowing
  • 253.6K Reduce Debt & Boost Income
  • 454.3K Spending & Discounts
  • 245.3K Work, Benefits & Business
  • 601.1K Mortgages, Homes & Bills
  • 177.5K Life & Family
  • 259.2K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16K Discuss & Feedback
  • 37.7K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.