We’d like to remind Forumites to please avoid political debate on the Forum.

This is to keep it a safe and useful space for MoneySaving discussions. Threads that are – or become – political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.

📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Tiled Shelf Along Bath is Slightly Sloping Towards Wall

Hi,

The house we have recently moved in to has a tiled shelf running along the side and back of the bath, against the tiled wall and level with the bath.

Problem is this shelf is slightly sloping towards the wall, and captures water when showering.

It's not much of a problem as we just sponge the water up after each shower, but i was wondering if there was an easy way to fix this?

I'm thinking it's a case of ripping up the existing tiles and relay with a slight slope towards the bath.
.......Or perhaps an easier way would be to lay thin tiles on top of the existing tiles, but then how could i correct the sloping issue?

I'm not holding much hope of an easy solution, but you never know.

Thanks

Comments

  • ic
    ic Posts: 3,484 Forumite
    Part of the Furniture 1,000 Posts Photogenic Name Dropper
    If you lay tiles on top, just make the adhesive thicker at the back to build up the slope. Look under the bath, you might find spare tiles left over from when the bathroom was originally done.
  • If you lay thin tiles on top just put more adhsive on the back side of the tile should create a slope the other way ( I would have thought!)
  • Ebe_Scrooge
    Ebe_Scrooge Posts: 7,320 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Combo Breaker
    Maybe drill 2 or 3 very small holes at the back to allow the water to drain off ? If you get them right in the corner, close to the wall, you won't notice them much. Admittedly this is a bit of a botch job, I think the above solutions of relaying tiles are better, but it's a quick and easy fix.
  • Cheers people, I might give the retiling ago.
    I can't imagine drilling a small hole to drain the water will help as the water would then flow to the floorboards underneath.
  • Maybe drill 2 or 3 very small holes at the back to allow the water to drain off ? If you get them right in the corner, close to the wall, you won't notice them much. Admittedly this is a bit of a botch job, I think the above solutions of relaying tiles are better, but it's a quick and easy fix.

    So by doing this, where do you think the water is going to go???? Bad advice.
  • phill99
    phill99 Posts: 9,093 Forumite
    Part of the Furniture 1,000 Posts
    Maybe drill 2 or 3 very small holes at the back to allow the water to drain off ? If you get them right in the corner, close to the wall, you won't notice them much. Admittedly this is a bit of a botch job, I think the above solutions of relaying tiles are better, but it's a quick and easy fix.

    Excellent advice. I'm sure the OPs insurarnce company will be very grateful when they claim for a water damaged floor and ceiling below.
    Eat vegetables and fear no creditors, rather than eat duck and hide.
  • Maybe drill 2 or 3 very small holes at the back to allow the water to drain off ? If you get them right in the corner, close to the wall, you won't notice them much. Admittedly this is a bit of a botch job, I think the above solutions of relaying tiles are better, but it's a quick and easy fix.

    Genius!! This will get you a whole new bathroom from your insurance!! :rotfl:
  • aliasojo
    aliasojo Posts: 23,053 Forumite
    Part of the Furniture 10,000 Posts Combo Breaker
    Maybe drill 2 or 3 very small holes at the back to allow the water to drain off ? If you get them right in the corner, close to the wall, you won't notice them much. Admittedly this is a bit of a botch job, I think the above solutions of relaying tiles are better, but it's a quick and easy fix.

    I unmask you as one of the seriously bad tradesmen shown regularly on Watchdog et al and I claim my £5 reward. :rotfl:
    Herman - MP for all! :)
  • [Deleted User]
    [Deleted User] Posts: 0 Newbie
    Part of the Furniture 1,000 Posts Name Dropper Photogenic
    edited 19 February 2011 at 10:58AM
    Hi,
    Cheers people, I might give the retiling ago.
    I can't imagine drilling a small hole to drain the water will help as the water would then flow to the floorboards underneath.

    even though I agree with the retiling suggestion, I think what Ebe Scrooge meant was to drill a few wee holes at the back edge of the shelf tile where it abutts the tiled wall thus allowing the water to drain through and down into the bath, I'm sure he didn't mean drill through the wall tiles.
  • Ebe_Scrooge
    Ebe_Scrooge Posts: 7,320 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Combo Breaker
    edited 8 August 2024 at 12:41PM
    Hi,



    even though I agree with the retiling suggestion, I think what Ebe Scrooge meant was to drill a few wee holes at the back edge of the shelf tile where it abutts the tiled wall thus allowing the water to drain through and down into the bath, I'm sure he didn't mean drill through the wall tiles.

    Sorry for the misunderstanding - yes, this is exactly what I meant, allow the water to drain off the shelf and back into the bath. It would be foolish indeed to allow the water to get behind the wall tiles :-)

    As I said, this IS a quick & dirty bodge job, the retiling suggestion is the better approach.
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 352.2K Banking & Borrowing
  • 253.6K Reduce Debt & Boost Income
  • 454.3K Spending & Discounts
  • 245.2K Work, Benefits & Business
  • 600.9K Mortgages, Homes & Bills
  • 177.5K Life & Family
  • 259K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16K Discuss & Feedback
  • 37.7K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.