Ready, steady… save!
You don’t need a chart to join in. Here are 2 ways to record your savings:
1. Cross it off
Pop a chart into your first post. Saved an amount? Cross it out! Read more »
£0.01 £0.02 £0.03
2. Write it down
Skip the chart and add updates to your first post. Read more »
“Another +£3 saved today. Go me!”
Use +£ before each new saving so it counts towards your total.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
British Gas homecare (boiler flush)
I have had an engineer out today as we are not getting hot water (only warm) he all but condemned our boiler due to its age.
He said that the heat exchanger is scaled up and this is preventing heat exchange to take place ,
however after he left I googled the problem and found something called power flushing that removes scale.
This has not been offered or suggested does anyone know if this would help/solve the problem?
He said that the heat exchanger is scaled up and this is preventing heat exchange to take place ,
however after he left I googled the problem and found something called power flushing that removes scale.
This has not been offered or suggested does anyone know if this would help/solve the problem?
0
Comments
-
Make/model and full description of fault and timescale please??Feudal Britain needs land reform. 70% of the land is "owned" by 1 % of the population and at least 50% is unregistered (inherited by landed gentry). Thats why your slave box costs so much..0
-
It is an Ferroli optima 800 combi (lpg) approx 15 years old,the problem has been for about 6 days.It was serviced by BG in December and it has been noisy ever since (fan maybe).
Fault is that the tap water only ever becomes warm it never gets hot even though the boiler fires up to heat the water.Heating of radiators is fine0 -
Im wondering why a "scale" problem should suddenly arrive when more than 6 days ago it was presumably ok.
Have you sourced a technical manual for it? Can you spot your model on this list or in the archive?
http://www.ferroli.co.uk/Download/index.phpFeudal Britain needs land reform. 70% of the land is "owned" by 1 % of the population and at least 50% is unregistered (inherited by landed gentry). Thats why your slave box costs so much..0 -
Yeah that makes me wonder about scale it cycles hot and cold water when running the taps,it is mostly only warm though he said the pressure was a bit low at 32 mbar.It has also got a slight leak since my engineer visit,he is coming out again tomorrow to fit a new fan so I will get him to fix that then0
-
This must be the first time in recorded forum history that the BG Homecare man does not say 'powerflush!'
But then of course he'll get more commission on a new boiler, won't he?
Possible sticking diverter valve?
Get a local independent RGI in instead.No free lunch, and no free laptop
1 -
Yeah that makes me wonder about scale it cycles hot and cold water when running the taps,it is mostly only warm though he said the pressure was a bit low at 32 mbar.It has also got a slight leak since my engineer visit,he is coming out again tomorrow to fit a new fan so I will get him to fix that then
The pressure would not be low at 32mb..in fact the pressure on the incoming main would likely be 32mb or less and the expected pressure at meter outlet would be around 21mb so that argument is questionable.
Do you live in a hard water area??
Try letting your boiler go completely cold.
Then run the hot tap to make it fire.
Feel the flow and return pipes to the central heating system (the larger ones) to see if they get hot.Feudal Britain needs land reform. 70% of the land is "owned" by 1 % of the population and at least 50% is unregistered (inherited by landed gentry). Thats why your slave box costs so much..0 -
I live in a modrately hard water area no the pipes to the radiators did not heat up0
-
C_Mababejive wrote: »The pressure would not be low at 32mb..in fact the pressure on the incoming main would likely be 32mb or less and the expected pressure at meter outlet would be around 21mb so that argument is questionable.
The boiler is LPG so WP is 37mbar, BP will be around 35mbar probably.
This boiler does not have a diverter valve and plate HE.
I suspect the primary side of the main HE is partially blocked with sludge, hence the cycling hot/cold.0 -
Ah yes,forgot it was LPG..had a quick scan of what i thought was the manual for this model and didnt see a diverter valve hence slightly different design.The boiler is LPG so WP is 37mbar, BP will be around 35mbar probably.
This boiler does not have a diverter valve and plate HE.
I suspect the primary side of the main HE is partially blocked with sludge, hence the cycling hot/cold.Feudal Britain needs land reform. 70% of the land is "owned" by 1 % of the population and at least 50% is unregistered (inherited by landed gentry). Thats why your slave box costs so much..0 -
BG engineer has phoned and said he won't be coming until tomorrow as the fan has not turned up.I mentioned about my ordering the parts if British gas does not stock them and he advised me that its cover would not include scaled up heat exchangers.
I may look into flushing it myself0
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 355.9K Banking & Borrowing
- 255K Reduce Debt & Boost Income
- 456.2K Spending & Discounts
- 248.4K Work, Benefits & Business
- 606.2K Mortgages, Homes & Bills
- 179.1K Life & Family
- 264K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.2K Discuss & Feedback
- 37.7K Read-Only Boards