Ready, steady… save!
You don’t need a chart to join in. Here are 2 ways to record your savings:
1. Cross it off
Pop a chart into your first post. Saved an amount? Cross it out! Read more »
£0.01 £0.02 £0.03
2. Write it down
Skip the chart and add updates to your first post. Read more »
“Another +£3 saved today. Go me!”
Use +£ before each new saving so it counts towards your total.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
Help ! - no programme guide on dvd recorder
niceday999
Posts: 1,058 Forumite
I Have a Panasonic Dvd Recorder 9 DMR -EZ27EB )
When I press the guide button on the remote this usually brings up the channels and programmes so i can set to record. It is saying
" No Guide " and No programmes come up, I dont remember pressing any buttons or anything that could have knocked it off sync - can anyone help me out ?
Also on the display of the actual dvd recorder itself it says "A1" wherer i think it usually displays the time ?????
HELP !!!!!
When I press the guide button on the remote this usually brings up the channels and programmes so i can set to record. It is saying
" No Guide " and No programmes come up, I dont remember pressing any buttons or anything that could have knocked it off sync - can anyone help me out ?
Also on the display of the actual dvd recorder itself it says "A1" wherer i think it usually displays the time ?????
HELP !!!!!
0
Comments
-
A1 = AV1 i.e. a rear scart socket. Press the input select button to cycle through the inputs too 'TV'.
Regarding the EPG issue, it's not listed but might the the same as here:
http://www.ukfree.tv/fullstory.php?storyid=1107051746
https://forums.moneysavingexpert.com/discussion/29560100 -
I have changed the input selection to tv but still not getting a guide on the dvd recorder,.......am i thinking i can no longer record now on this dvd recorder just use it for watching dvd's ?0
-
When you changed to TV did you see anything on screen. If not check you aerial is still connected.
You could also try to reset - function menu, others, auto setup0 -
I suspect you can still set recordings the long way by programming the start and finish times and channel.niceday999 wrote: »I have changed the input selection to tv but still not getting a guide on the dvd recorder,.......am i thinking i can no longer record now on this dvd recorder just use it for watching dvd's ?There's love in this world for everyone. Every rascal and son of a gun.
It's for the many and not the few. Be sure it's out there looking for you.
In every town, in every state. In every house and every gate.
Wth every precious smile you make. And every act of kindness.
Micheal Marra, 1952 - 20120 -
-
Go through the setup procedure again, or scan for new channels. That should bring the guide back, unless there's an external cause, such as aerial thrown off-target with snow, etc. ...
Refer to instruction manual for how to do this0 -
I am still trying to get this to record...i have set the dvd recorder to record manually and it seems to record ok but when i try to watch it the screen just says No signal...i do have a signal on tv as I am watching it at the minute........
i have tried to scan for new channels as sugested above.......
help!!!!!!0 -
can anyone advise me as I am loosing the will to live trying to get this to record...I have it linked to a Samsung Tv with freeview on the TV0
-
Seems to have been answered on AVForums?0
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 355.9K Banking & Borrowing
- 255K Reduce Debt & Boost Income
- 456.2K Spending & Discounts
- 248.4K Work, Benefits & Business
- 606.1K Mortgages, Homes & Bills
- 179K Life & Family
- 263.9K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.2K Discuss & Feedback
- 37.7K Read-Only Boards