PLEASE READ BEFORE POSTING

Hello Forumites! However well-intentioned, for the safety of other users we ask that you refrain from seeking or offering medical advice. This includes recommendations for medicines, procedures or over-the-counter remedies. Posts or threads found to be in breach of this rule will be removed.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Shabby Chic; Volume III

Options
1598599601603604647

Comments

  • Seakay
    Seakay Posts: 4,269 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Combo Breaker
    I've never used it myself but it gets a good review here:
    http://www.oldthingsnewblog.com/2012/07/3-homemade-chalk-paint-recipes-reviewed.html
  • steve_2012 wrote: »
    Anyone have any experience with using Calcium Carbonate Powder for making chalk paint?

    I'm not sure if you're taking the Mick or not, but calcium carbonate IS chalk.

    It's the basic ingredient in chalk paint. Of course it'll get good reviews.......
    :huh: Don't know what I'm doing, but doing it anyway... :huh:
  • steve_2012
    steve_2012 Posts: 182 Forumite
    Part of the Furniture 100 Posts Combo Breaker
    edited 24 September 2014 at 11:09PM
    I'm not sure if you're taking the Mick or not, but calcium carbonate IS chalk.

    It's the basic ingredient in chalk paint. Of course it'll get good reviews.......
    no im not taking the mick and i know its chalk but im thinking of trying it as opposed to POP just wondered if anyone else has here.
    on reading around the web for new ideas i came across it a lot more often than i did a year or so back when i started doing some furniture.
    i also like to finish my pieces to a full finish rather than distress and CC is apparently less coarse.
    steve.
  • chalkysoil
    chalkysoil Posts: 1,662 Forumite
    "I purchased FOOD GRADE Calcium Carbonate as it is very fine and dissolves easily in liquid."

    I'd like to give it a try, also I'm thinking of sacrificing a small Kenwood whisk to whizz the mix before adding paint. I found warm water encourages lumps and cold discourages melting with POP so am trying room temperature water now.
  • I've never really understood the warm water idea,because if you add warm water too anything cement you will just speed up the chemical reaction and that's not what is needed, I just use tap water but ideally I would think very cold water is best.
    I also now strain my HMCP through a small fine mesh tea strainer 30 mins after mixing.
    The POP I'm using at the moment is from hobby craft and is there brand, it seems as fine as the only other brand I've used but I don't think the quality is as good as it creates a lot more small set hard pieces after 20 to 30 miins, I don't get these issues with "Anita's" docraft.
    I'd like to try the calcium carbonate but I've yet to find any agreement on what the mix should be, it varies from 4:1 to almost 1:1. And rather rather read some measured recipes rather than a cup to 2 tbs, I like to know my mix.
  • Cacran
    Cacran Posts: 536 Forumite
    Part of the Furniture 100 Posts Combo Breaker I've been Money Tipped!
    Thanks, Steve 2012 for letting us know about using Calcium Carbonate. I didn't know it was chalk, Gingernutty!

    I have used pop in my paint and it has come out well. I am going to try the cc next time. I have a bit of powdered ready to mix plaster, the one like polyfiller. Do you think that would be any good for paint?
    Keep on trucking!
  • Hi Steve

    For a full finish I tend to use a eggshell paint with a cp primer
  • surfer2009 wrote: »
    Hi Steve

    For a full finish I tend to use a eggshell paint with a cp primer

    ive used acrylic eggshell with cp primer and it finishes great, i do intend to use more of it.
    Cacran wrote: »
    Thanks, Steve 2012 for letting us know about using Calcium Carbonate. I didn't know it was chalk, Gingernutty!

    I have used pop in my paint and it has come out well. I am going to try the cc next time. I have a bit of powdered ready to mix plaster, the one like polyfiller. Do you think that would be any good for paint?

    ive never used anything other than POP but you can use wall grout which being a tiler i have plenty of but have never used it as ive read it is not as good as POP so ive stuck with that.
  • here is couple ive just finished, the wired front was by request the top will be coming off and will be used as a tv stand.

    there both the same colour as the darker one, bad camera and bad light.
    20140922_160100_zps4bab51c8.jpg
    20140922_155742_zps6c476dc4.jpg
  • great work Steve. Those USA measurements, "cups" etc, they can be translated to an exact fluid ounce, I found it once for recipes, the "cups" are an exact size not just any old tea cup. We use mugs anyway!


    I used Polyfiller powder when I started homemade CP, I can't remember any difference to P of P, it costs more so I only used it as I'd got some on hand bought RTC.


    Might be interesting to try the ready mixed stuff as that seems quite fine.


    I've got some calcium C in my Amazon basket, just waiting for something else to buy to get over the £10 for free postage.
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 351.2K Banking & Borrowing
  • 253.2K Reduce Debt & Boost Income
  • 453.7K Spending & Discounts
  • 244.2K Work, Benefits & Business
  • 599.2K Mortgages, Homes & Bills
  • 177K Life & Family
  • 257.6K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.2K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.