Replacing a lead flashing

The lead flashing between the house & the 1 storey extension is coming away from the wall & letting rain in. I covered it with a groundsheet held in place with bricks - but am having trouble finding someone willing to do a job this small.

Is it simply a case of removing the flashing, applying mortar along the seam like glue & replacing it/putting in a new one? You see, that doesn't sound too difficult - have I underestimated the work required?

I believe the flashing is coming away because the gutter from the roof goes straight down to a point just above the flashing & just empties. It trusts the gradient of the flat roof to get the water into the gutter along the edge of the extension. Presumably a 90degree angle on the bottom to redirect the water so it doesn't hit the roof will solve the underlying problem.
Still wish I could buy a TARDIS instead of a house!

Comments

  • ....Is it simply a case of removing the flashing, applying mortar along the seam like glue & replacing it/putting in a new one?.....
    Basically, yes, but given that it has come away, then the suspicion is that it wasn't done properly in the first place.
    A house isn't a home without a cat.
    Those are my principles. If you don't like them, I have others.
    I have writer's block - I can't begin to tell you about it.
    You told me again you preferred handsome men but for me you would make an exception.
    It's a recession when your neighbour loses his job; it's a depression when you lose yours.
  • Basically, yes, but given that it has come away, then the suspicion is that it wasn't done properly in the first place.

    So what is "properly" ?
    Still wish I could buy a TARDIS instead of a house!
  • You are better off using lead mate sealant or similar as it bonds to lead better than mortar.

    Clean out the joints first, replace the lead flashing and repoint with lead mate, using a silicone gun-

    http://www.screwfix.com/app/sfd/cat/pro.jsp?id=63515&ts=61611
  • So what is "properly" ?
    I think there is a .pdf on here somewhere: http://www.leadsheetassociation.org.uk/
    A house isn't a home without a cat.
    Those are my principles. If you don't like them, I have others.
    I have writer's block - I can't begin to tell you about it.
    You told me again you preferred handsome men but for me you would make an exception.
    It's a recession when your neighbour loses his job; it's a depression when you lose yours.
  • plumb1_2
    plumb1_2 Posts: 4,395 Forumite
    Part of the Furniture 1,000 Posts Photogenic Name Dropper
    You are better off using lead mate sealant or similar as it bonds to lead better than mortar.

    Clean out the joints first, replace the lead flashing and repoint with lead mate, using a silicone gun-

    http://www.screwfix.com/app/sfd/cat/pro.jsp?id=63515&ts=61611

    Yes , But also fix the lead with lead wedges.
  • Ah now I know why it all went wrong.

    All that's on the roof at the moment is a large amount of mortar stuck into the right-angle like it came from a veyr large toothpaste tube, with a strip of lead bent into an L shape stuck on top.

    No sealant & nothing pushed into the vertical brickwork at all.
    Still wish I could buy a TARDIS instead of a house!
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 349.8K Banking & Borrowing
  • 252.6K Reduce Debt & Boost Income
  • 453K Spending & Discounts
  • 242.8K Work, Benefits & Business
  • 619.5K Mortgages, Homes & Bills
  • 176.4K Life & Family
  • 255.7K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 15.1K Coronavirus Support Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.