Car Radio Unlocking

cov1

Thank u so much !!!!!!!!!!!!!!!!!!!ur a star...

RegWorts

spacesintra wrote: »

pls can anybody help with an unlock code for my car radio,
type : philips car 400
serial no: GM0400X2433853.
thanks

Sorry..Main Dealer or a Radio Decoding Service only

Rich_S

Ford Fiesta 4500 Stereo/CD Player Code Please

Serial Number - M132784

austin

[edit] done now, thanks!

ScottishSapper

rich_s wrote: »

ford fiesta 4500 stereo/cd player code please

serial number - m132784

,.,.,.1545,.,.,

ScottishSapper

austin wrote: »

Hi there, wonder if any of you guys help? had to disconnect the battery on my Renault Clio today and its shouting for a code now. ive taken the radio out and the label is riddled with numbers, so ive just taken a pic:



hope someone can help! thanks!

0661 may do it

Rich_S

ScottishSapper wrote: »

,.,.,.1545,.,.,

Thanks!

austin

ScottishSapper wrote: »

0661 may do it

wow thanks very much!! ive just tried entering the code, however every button just 'beeps' and CODE just remains on the dash display :doh:

ill keep trying though. thanks again!

ScottishSapper

austin wrote: »

wow thanks very much!! ive just tried entering the code, however every button just 'beeps' and CODE just remains on the dash display :doh:

ill keep trying though. thanks again!

Please note that code entry is only possible when a number is flashing in the seperate display. If the display continually shows "CODE" then the unit may be codelocked and will need to be left switched on up for up to two hours to reset before another code entry attempt is possible. If it does not reset after this time, then all of your code entry attempts may have been used up
Switch Radio On - Display Shows
" 0000 " with the 1st digit flashing
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
If the correct code number is now shown
Press And Hold " ¬ " Until A Beep Is Heard

austin

ScottishSapper wrote: »

Please note that code entry is only possible when a number is flashing in the seperate display. If the display continually shows "CODE" then the unit may be codelocked and will need to be left switched on up for up to two hours to reset before another code entry attempt is possible. If it does not reset after this time, then all of your code entry attempts may have been used up
Switch Radio On - Display Shows
" 0000 " with the 1st digit flashing
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
If the correct code number is now shown
Press And Hold " ¬ " Until A Beep Is Heard

thats worked a treat, thanks very much!!