Car Radio Unlocking

the182guy

tjtigger wrote: »

Hi we have tried this and it does nothing when we hold the 5 any ideas? thanks

If no SELECT button, try just pressing button 5 without holding, failing that try pressing or press and hold button 6.

ScottishSapper

Silverfox1 wrote: »

does this change your mind about my code,

Sorry:( afraid not

Rossp_2

ScottishSapper wrote: »

.,,.6012,.,...

Excellent, Thanks

tjtigger

ScottishSapper wrote: »

The code for serial 022704 is as given by the182guy. If you do not have a select button then the entry details are as said ending with holding button 5 for a few seconds.

Have you checked the serial on the unit or taken it from the vehicle handbook? If from the handbook then it may be a replacement unit, if the serial is 022704 then it is possible that the unit has been re-coded in the past. If so then I'm afraid that you will have to have it done again at a local de-coder.

Check the following for input details:


Hi we have removed the radio and taken the code from the radio also what button would the select button be is it written as select or something else. Many thanks.

Silverfox1

ok, oh well thankyou for trying

tjtigger

the182guy wrote: »

If no SELECT button, try just pressing button 5 without holding, failing that try pressing or press and hold button 6.

Hi it worked by pressing button 5 without holding and it was our last attempted before it locked so many thanks really apprieciate it.:j

the182guy

tjtigger wrote: »

Hi it worked by pressing button 5 without holding and it was our last attempted before it locked so many thanks really apprieciate it.:j

No worries, glad you got it working in the end:D

billmuirca

RegWorts wrote: »

try code 1623

Thanks for code = 1623, however without original radio handbook I have not found a way to input it yet.

currently when I press channel 1 button it feeds in 0 only, when pressed again it feeds in more 0s.

Channel buttons 2 - 6 fail to register.

Can you help ?

Thanks again.

ScottishSapper

billmuirca wrote: »

Thanks for code = 1623, however without original radio handbook I have not found a way to input it yet.

currently when I press channel 1 button it feeds in 0 only, when pressed again it feeds in more 0s.

Channel buttons 2 - 6 fail to register.

Can you help ?

Thanks again.

Code Entry as Follows:
Switch Radio On - Display Shows
" CODE "
Press Preset " 1 " and the display will show
" 0 - - - "
Press Tuning Up Button " > " For Correct Digit
Press Preset " 1 " to Enter
Press Tuning Up Button " > " For Correct Digit
Press Preset " 1 " to Enter
Press Tuning Up Button " > " For Correct Digit
Press Preset " 1 " to Enter
Press Tuning Up Button " > " For Correct Digit
If the correct code number is now shown
Press Preset " 1 " to Enter

Powerpuffbabe

Help i need the code for my Ford KA radio

Model: 5000 RDS E-O-N
Serial number: M003550

Any help would be much appreciated

R's