We're aware that some users are experiencing technical issues which the team are working to resolve. See the Community Noticeboard for more info. Thank you for your patience.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

tv screen blurred including menus

Options
BOBS
BOBS Posts: 2,871 Forumite
Have a Philips tv - older style (not plasma etc).
Today the screen is blurred, even the menus. Thought it was a tuning problem.. Have checked all the connections and turned it off and on. Am at a loss as to what is wrong.
Any suggestions very welcome.
Thanks
[FONT=verdana,arial,helvetica][/FONT]
«13

Comments

  • fwor
    fwor Posts: 6,862 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
    Assuming it's CRT based and that you haven't placed anything magnetic (e.g. unshielded speakers) on or near it, the next most likely explanation is that the high voltage section in the power supply is failing.

    If that's what is wrong, it won't be economically viable to fix.
  • kwikbreaks
    kwikbreaks Posts: 9,187 Forumite
    Well it's either what fwor said or Tesco had a real good offer on wine that you couldn't resist....
  • BOBS
    BOBS Posts: 2,871 Forumite
    fwor - have twiddled with everything i can think of - think its for the nackers yard!! Thankfully we kept our other old tv when we bought our new big flatscreen. This tv is just the one in kiddies den!

    Kwikbreaks - way too early to be drinking wine - its not 2pm yet - and I have a full house of kiddies!! Could be tempted tho - might improve the piccy :-()
    [FONT=verdana,arial,helvetica][/FONT]
  • moonrakerz
    moonrakerz Posts: 8,650 Forumite
    Part of the Furniture 1,000 Posts Combo Breaker
    Or............................http://www.specsavers.co.uk/ :D:D
  • penrhyn
    penrhyn Posts: 15,215 Forumite
    Part of the Furniture Combo Breaker
    Ahh probably the tubes gone soft, in the good old days you could re-getter them.
    That gum you like is coming back in style.
  • kwikbreaks
    kwikbreaks Posts: 9,187 Forumite
    In the good old days there were shops you could take stuff to get things repaired or even buy spares to do the job yourself (anybody old enough to remember replacing the elements in irons or failing that kettles which remained repairable a little longer?). TV repairs seem to be a thing of the past.

    These days most things last well and if they fail the cheapest option is to scrap them and get a new one.
  • penrhyn
    penrhyn Posts: 15,215 Forumite
    Part of the Furniture Combo Breaker
    ...Fraid so, iron elements sandwiched between a couple of sheets of mica. Been there done that!
    That gum you like is coming back in style.
  • espresso
    espresso Posts: 16,448 Forumite
    Part of the Furniture 10,000 Posts Combo Breaker
    BOBS wrote: »
    have twiddled with everything i can think of - think its for the nackers yard!!


    Except the focus control. If that doesn't work, parts are still readily available e.g. a new line output transformer here Any real electronics engineer could easily fix this and keep it in service for many more years.
    :doh: Blue text on this forum usually signifies hyperlinks, so click on them!..:wall:
  • kwikbreaks
    kwikbreaks Posts: 9,187 Forumite
    espresso wrote: »
    Any real electronics engineer could easily fix this and keep it in service for many more years.
    A real electronics engineer wouldn't be posting here asking what the problem was and someone who wasn't isn't going to be the best qualified to replace parts of TV HT circuitry.

    A cheap LCD TV is going to take up a lot less room and will probably pay for itself in saved electricity over the remaining lifetime of the repaired CRT.
  • espresso
    espresso Posts: 16,448 Forumite
    Part of the Furniture 10,000 Posts Combo Breaker
    kwikbreaks wrote: »
    A real electronics engineer wouldn't be posting here asking what the problem was and someone who wasn't isn't going to be the best qualified to replace parts of TV HT circuitry.

    I did not suggest that the OP was a real electronics engineer did I?

    Just pointing out that the set does not have to be scrapped and could easily be mended for a few quid by the right person - obviously not you though!

    :rotfl:
    :doh: Blue text on this forum usually signifies hyperlinks, so click on them!..:wall:
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 351K Banking & Borrowing
  • 253.1K Reduce Debt & Boost Income
  • 453.6K Spending & Discounts
  • 244K Work, Benefits & Business
  • 598.9K Mortgages, Homes & Bills
  • 176.9K Life & Family
  • 257.3K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.