Sky Plus, 2nd TV?

knightstyle

Hi everyone, a friend has just acquired a Sky Plus box, we have set it up and it is working fine with 2 leads from the LNB. But he says his old Sky box used to allow him to plug a second TV into the RF out socket to watch TV in the bedroom. This does not work with the Sky Plus box. He does not have a TV aerial, just a satellite dish.
Any reason why the second TV doesn't work?

penrhyn

The RF2 output is off by default, it needs to be switched on.

This may work otherwise Google a bit further.
1 Press the SERVICES button on your 'Digibox Remote Control'.(DRC)

2 Press the NUMBER 4 button on your DRC. (System Set-up)

3 Press the 0 then the 1 then the SELECT buttons (Installer menu)

4 Press NUMBER 4 again. (RF Outlets)

5 Press the DOWN ARROW button once. (second outlet power supply)

6 Then press the SIDE ARROW button once. (turning power ON)

7 Press the DOWN ARROW button once again.(save new settings)

8 Then press the SELECT button.

spike7451

penrhyn wrote: »

The RF2 output is off by default, it needs to be switched on.

This may work otherwise Google a bit further.
1 Press the SERVICES button on your 'Digibox Remote Control'.(DRC)

2 Press the NUMBER 4 button on your DRC. (System Set-up)

3 Press the 0 then the 1 then the SELECT buttons (Installer menu)

4 Press NUMBER 4 again. (RF Outlets)

5 Press the DOWN ARROW button once. (second outlet power supply)

6 Then press the SIDE ARROW button once. (turning power ON)

7 Press the DOWN ARROW button once again.(save new settings)

8 Then press the SELECT button.

Failing that,the 9v power supply on the box might be !!!!!!ed.

knightstyle

Thanks for that, I am now back at my home but will try it tomorrow when I go round there. Hope it works!!!
Thanks again guys.

knightstyle

IT WORKS!!!!!! Great result from my favourite site!