Old radiator output vs new radiator

Currently I have in my kitchen an old double radiator (no fins) - size is approx 590mm by 800mm.

My mum is redoing her bathroom and is replacing her radiator with a heated towel radiator so has a reasonably new radiator I could use. It's a single panel, single fin of approximately 600mm by 700mm.

Can anyone tell me if I lose/gain much heat by replacing my old double radiator with no fins with a new single radiator with single fins?

Comments

  • I think you will loose heat output with a smaller single radiator, the fins won't make that much difference.
    I have a lot of problems with my neighbours, they hammer and bang on the walls sometimes until 2 or 3 in the morning - some nights I can hardly hear myself drilling ;)
  • *j*
    *j* Posts: 324 Forumite
    Part of the Furniture 100 Posts
    If you search radiators on the wickes.co.uk website they give you the output of the various sized radiators in watts. A double approx 600 x 800 gives out about 1400w, and the single 600 x 700 is about 700w.

    I realise the towel rail would add a bit to that.

    The output drops by about a half, but do you need 1.4 kw to heat the bathroom? Is the original double rad oversized??

    *j*
  • jem16
    jem16 Posts: 19,574 Forumite
    Part of the Furniture 10,000 Posts Name Dropper Photogenic
    *j* wrote: »
    If you search radiators on the wickes.co.uk website they give you the output of the various sized radiators in watts. A double approx 600 x 800 gives out about 1400w, and the single 600 x 700 is about 700w.

    All the new radiators are convector radiators which I can find out the output for fairly easily.

    My question was what was the ouput of an old, non convector type radiator which is no longer made.
    I realise the towel rail would add a bit to that.

    The towel rail is nothing to do with me. It's my mother who is replacing a convector radiator with a towel rail.
    The output drops by about a half, but do you need 1.4 kw to heat the bathroom? Is the original double rad oversized??

    I'm not heating the bathroom - my mother is.

    I'm heating the kitchen.
  • KeithP
    KeithP Posts: 41,296 Forumite
    Part of the Furniture 10,000 Posts Name Dropper
    You can also find the heat output for older radiators fairly easily too.

    Page four of this document A Guide to Radiator Sizes and Heat Output covers the old 'without fins' radiators.
    The heat output is in watts per metre length.
  • jem16
    jem16 Posts: 19,574 Forumite
    Part of the Furniture 10,000 Posts Name Dropper Photogenic
    KeithP wrote: »
    You can also find the heat output for older radiators fairly easily too.

    Page four of this document A Guide to Radiator Sizes and Heat Output covers the old 'without fins' radiators.
    The heat output is in watts per metre length.

    Thanks - that's exactly what I'm after.
  • *j*
    *j* Posts: 324 Forumite
    Part of the Furniture 100 Posts
    I'll need to remember to read more carefully.

    That will teach me to post replies at 10:30 on a Saturday evening!!:)

    *j*
  • vaio
    vaio Posts: 12,287 Forumite
    Part of the Furniture 10,000 Posts Combo Breaker
    for non convectors the output is generally proportional proportional to area, the the old 750 high single panel ones are about 1 kW per metre length, making it double panel adds about 60% and fins will add another 25%

    Your existing one will be about (590 x 800 / 750 x 1.6) = 1 kW, the new one will be about (600 x 700 / 750 x 1.25) = 700 watts
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 350.3K Banking & Borrowing
  • 252.9K Reduce Debt & Boost Income
  • 453.2K Spending & Discounts
  • 243.3K Work, Benefits & Business
  • 597.9K Mortgages, Homes & Bills
  • 176.6K Life & Family
  • 256.4K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.