We'd like to remind Forumites to please avoid political debate on the Forum... Read More »
My dyson block any ideas on how to unblock please
sitcom123
Posts: 362 Forumite
My dyson is blocked and I am not sure what to unscrew to find the blockage, 
any help from you would be great Model DC01
any help from you would be great Model DC01 0
Comments
-
Here is a link to the manual for the DC01 - all instructions are there including removing a blockage. I follow this procedure and my machine has been serving me well for many years.
http://media.dyson.com/downloads/UK/floorcare/Manuals/dc01_std_manual_uk.pdf
Hope this helps.0 -
Is the block in the 'wand'?
If so try dropping a coin down it - possibly.
There should be a help-line number on your dyson - try phoning them up if you can't get it shifted.0 -
Lay the dyson down and use a hooked piece of wire to the side of the suction channel. Pull out the fluff etc.This is an open forum, anyone can post and I just did !0
-
Here is a link to the manual for the DC01 - all instructions are there including removing a blockage. I follow this procedure and my machine has been serving me well for many years.
http://media.dyson.com/downloads/UK/floorcare/Manuals/dc01_std_manual_uk.pdf
Hope this helps.
Many thanks, printed off instructions and dyson working better than ever:j0 -
My mum used to use garden cains to unblock the vacuum pipe.If you found my post helpful, please remember to press the THANKS button! --->0
-
I have a vision of an angry Basil Fawltyrichardc1983 wrote: »My mum used to use garden cains to unblock the vacuum pipe.
The advice I give on here is based on my many years in the preservation industry. I choose to remain anonymous, I have no desire to get work from anyone. No one can give 100% accurate advice on a forum if I get it wrong you'll get a sincere apology and that's all:D
Don't like what I have to say? Call me on 0800 KMA;)0 -
Any advice for me,I have a dyson like this that sucks great from the hose but is rubbish when upright.
I can't find a blockage anywhere could it be a part problem.
Thanks.0 -
Removed the screws from the bottom and looked behind the pick up roller?0
-
Dyson used to have a very good falult diagnosis website - I don't know if they still do, but I used it successfully a few years back when our Dyson wouldn't work properly (& I am not very technically-minded).2025's challenges: 1) To fill our 10 Savings Pots to their healthiest level ever
2) To read 100 books (24/100)
"Life can only be understood backwards but it must be lived forwards" (Soren Kirkegaard 1813-55)0 -
MRSTITTLEMOUSE wrote: »Any advice for me,I have a dyson like this that sucks great from the hose but is rubbish when upright.
I can't find a blockage anywhere could it be a part problem.
Thanks.
Does the roller spin okay when its on?
With the DC01, the whole thing practically comes apart. Have you had the rolelr out and checked that it's all clear around it?"One day I realised that when you are lying in your grave, it's no good saying, "I was too shy, too frightened."
Because by then you've blown your chances. That's it."0
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 350.1K Banking & Borrowing
- 252.8K Reduce Debt & Boost Income
- 453.1K Spending & Discounts
- 243.1K Work, Benefits & Business
- 597.5K Mortgages, Homes & Bills
- 176.5K Life & Family
- 256.1K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.1K Discuss & Feedback
- 37.6K Read-Only Boards