Indesit WIXE 127 installation...please help!

pebbles88

Hello,

we have just been bought one of thesse washing machines, im trying to fathom out in installation instructions, and it has started by saying remove the 3 protective screws and the rubber bush with the respective spacer.


i wasnt here when they delivered it, and my mum says they did nothing, but on 2 of the screws it looks like they have remvoed stuff, but on the top one, when i take the bolt out, nothing moves, ie the way they describe it the bung should fall down..... it doesnt!!

can anyone advise??? pretty please... i dont wanna be washing all christmas day!

ormus

the spacers dont always fall down cleanly. sometimes they can get stuck in the machine gubbins somewhere.
i shouldnt worry too much. taking the transit bolts out is then main issue.

pebbles88

ormus wrote: »

the spacers dont always fall down cleanly. sometimes they can get stuck in the machine gubbins somewhere.
i shouldnt worry too much. taking the transit bolts out is then main issue.

thanks

so just take the bolts out completely, then that;ll be ok?? wasnt sure if they needed to go back in....

yes, i am having one of those days!! LOL

caleyles

The bolts/spacers etc are there to protect the drum moving about and being damaged in transit - once you open the door give the drum a shake and if it moves freely then your brackets have been removed

pebbles88

caleyles wrote: »

The bolts/spacers etc are there to protect the drum moving about and being damaged in transit - once you open the door give the drum a shake and if it moves freely then your brackets have been removed

hiya,

thankyou, it will spin if i turn it, is that what you mean?? or move as in bounce around type move!