Sagem PVR 6200 freeview box , Forgotten Code!

CLLC

Hello everybody!

I've stupidly changed the lock code on my Freeview box and Have stupidly forgotten it

Can anyone tell me how to over ride this so i can change it back or to a different code???

I have had a good luck and found pressing menu , menu, red, menu but it hasn't helped?

Any help most appreciated! Thanks!

CLLC

CLLC

anyone?

OneADay

If there is a reset button at back of it - you could do a master reset which would put the code back to 0000 probably.

I dont have that box but thats how normally these things work.

And if there is no reset button - well if you know its 4 digits, well you have a 9999 attempts

CLLC

Thanks for the Suggestion OneADay

I should have thought of that first lool , Just had a look now and no reset button

Looks like I better get Cracking , Literally

If anyones else has Any suggestions on resetting it is appreciated!

CLLC

OneADay

The reset button is usually a small hole which you can only press with a pin or needle. You sure it doesnt have one?

Lost2

Turn it off and leave it off for about 10 minutes see if that works I sometimes have to do this with Sky box

what I should have said is turn it off by the main switch

CLLC

Thanks for your suggestions Guy's {and girls}

OneADay I triple checked and no sign of a reset button

Lost 2 , I tried that out last night but with no luck

fiddiwebb

Try 1234 or 0000

CLLC

Hi Fiddieweb ,

Tried them , But not worked either. I even tried phoning sagem but no answer :rolleyes:

fiddiwebb

Any chance this would work?

1. Turn off the unit for 15 minutes to cause a full reset.
2. Turn on the PVR with everything attached except the antenna input.
3. You will get an Er09 on the display. On my PVR there was no output on the TV screen whatsoever (totally black screen).
4. Press 'OK' on the remote (confusing as there is no clue that this is what you should be doing, though Sagem support thought that the PVR should prompt you.
5. The box reboots in standby mode.

CLLC

Guys Thanks for all your help !

I just got off the phone from Sagem , they gave me the Mastercode ""0044"

Funny thing is , I was going to do all the Combination's going up to 9999 but I get to 0037 and couldn't be bothered to go any further , If only i carried on a little bit more

CLLC