Dual fuel cooker in flat what are my choices?

Hi, I am renovating my ground floor flat kitchen. Currently I have a gas oven and hob cooker connected by a bayonet fitting. The cooker came with the house purchase and it's very old and, well, skanky!! I want to replace it but have just noticed that some appliances aren't allowed for flats.

I want to buy a dual fuel free standing cooker, gas hob and electric oven. Can I do this cheaply? Well no! The cheapest cooker is over £600 on comet that is FSD fitted.

So my question is, does FSD requirements for flats still apply? I was reading a thread on here last year where it seemed to be a requirement, then it was removed, then reinstated.

Any other ideas bout getting cheap cooking appliances?! I dont really like electric, and dont think my fuseboard could take a electric hob and oven - only 16amp dedicated fuse.

Any advice on best thing to do that wont cost me more than the earth would be great thanks.

Comments

  • Canucklehead
    Canucklehead Posts: 6,254 Forumite
    djheath wrote: »
    Hi, I am renovating my ground floor flat kitchen. Currently I have a gas oven and hob cooker connected by a bayonet fitting. The cooker came with the house purchase and it's very old and, well, skanky!! I want to replace it but have just noticed that some appliances aren't allowed for flats.

    I want to buy a dual fuel free standing cooker, gas hob and electric oven. Can I do this cheaply? Well no! The cheapest cooker is over £600 on comet that is FSD fitted.

    So my question is, does FSD requirements for flats still apply? I was reading a thread on here last year where it seemed to be a requirement, then it was removed, then reinstated.

    Any other ideas bout getting cheap cooking appliances?! I dont really like electric, and dont think my fuseboard could take a electric hob and oven - only 16amp dedicated fuse.

    Any advice on best thing to do that wont cost me more than the earth would be great thanks.

    Good afternoon: the latest advice is available here.
    Give Gas Safe Register a call for confirmation.

    HTH

    Canucklehead
    Ask to see CIPHE (Chartered Institute of Plumbing & Heating Engineering)
  • djheath
    djheath Posts: 453 Forumite
    Part of the Furniture 100 Posts Combo Breaker
    Thanks for that, very helpful.

    It seem sit may be cheaper to get a gas hob fitted as there seems to be more of these FSD fitted. But then I have to pay to get someone to fit it, so that puts up the cost! Goodness it's a mine field!!

    You dont cover surrey do you Canucklehead and can do "moneysavingexpert" rates can you!! :d
  • Canucklehead
    Canucklehead Posts: 6,254 Forumite
    djheath wrote: »
    Thanks for that, very helpful.

    It seem sit may be cheaper to get a gas hob fitted as there seems to be more of these FSD fitted. But then I have to pay to get someone to fit it, so that puts up the cost! Goodness it's a mine field!!

    You dont cover surrey do you Canucklehead and can do "moneysavingexpert" rates can you!! :d

    Hi...my OH (the RGI in the family) does cover Surrey and has fit boilers/central heating systems and bathrooms for MSErs but he doesn't do hobs, cookers or gas fires;)

    HTH

    Canucklehead
    Ask to see CIPHE (Chartered Institute of Plumbing & Heating Engineering)
  • djheath
    djheath Posts: 453 Forumite
    Part of the Furniture 100 Posts Combo Breaker
    No problem thank you.

    This is all getting a little complicated now. I was weighing up my options last night:

    1: Get a free standing electric cooker + ceramic hob.
    Pros: Easy to install as all electrical points are there inc 32amp cooker circuit.
    Cons: Not as good as gas to cook on, plus I will need to get a gas man in to cap off the existing bayonet fitting anyway.

    2: Get a standalone gas cooker -
    Pros: I can connect myself to the existing bayonet.
    cons: It has to be FSD which means minimum £600!

    3: Get a separate gas hob and electric oven
    Pros: looks best!
    Cons: Would need gas man to come in and remove bayonet fitting then run a small amount of solid pipe up the wall to fix to the hob. I dont know though when they could do this, i.e. would the gas man want the bayonet fitting removed before I install all the cabinets and the work top, then when I have fitted the cabinets and work top he can come back and connect up the hob? Or would he mind if I built everything, then he comes back and will happily work under the counter in the oven cabinet to remove the old bayonet and fit a new rigid pipe and isolator?

    Why is nothing ever easy!!?:confused::p
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 349.8K Banking & Borrowing
  • 252.6K Reduce Debt & Boost Income
  • 453K Spending & Discounts
  • 242.7K Work, Benefits & Business
  • 619.5K Mortgages, Homes & Bills
  • 176.4K Life & Family
  • 255.7K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 15.1K Coronavirus Support Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.