We’d like to remind Forumites to please avoid political debate on the Forum.
This is to keep it a safe and useful space for MoneySaving discussions. Threads that are – or become – political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
Hot water problem

Money_Bunny_4
Posts: 67 Forumite
We have a 5 yr old combi boiler which is serviced yearly under a contract. The problem is that although the heating works well and the water is hot we don't seem to be able to get much hot water through in the bathroom upstairs. It runs lukewarm unless we turn the tap down reducing the water pressure to not much more than a dribble. Takes ages to run a bath.
The water downstairs is fine even when the tap is turned on fully. I've had the service contract company out twice and they can't find a problem, just said to continue turning the tap down to get hot water. It's becoming very annoying now though.
Any ideas or suggestions please?
The water downstairs is fine even when the tap is turned on fully. I've had the service contract company out twice and they can't find a problem, just said to continue turning the tap down to get hot water. It's becoming very annoying now though.
Any ideas or suggestions please?
Trying to save money to move to France.....eventually!
£2 savers club = £24 saved so far :T
£2 savers club = £24 saved so far :T
0
Comments
-
I am no expert just my experience of my own combi and lengthy discussions with my boiler installer.I think a lot depends on what the hot water flow rate is from your combi boiler is.The flow rate from my boiler is 14 litres per minute which is fairly good or so im led to believe but i still have to turn the tap down a bit when filling my bath if I leave it turned up fully the water is only at best warm.Also it depends on how long the pipes are to your bathroom from the boiler the longer the distance the more heat is lost from boiler to bathroom.It definately takes longer though to fill a bath with a combi than with the old tank fed system,I just turn the hot tap down to fill and do something else for 5 minutes while it fills.hope this helps0
-
Ohhh dunno about the hot water flow rate but I'll have a look into that thanks. The boiler isn't too far from the bathroom so I suppose that shouldn't be the problem.Trying to save money to move to France.....eventually!
£2 savers club = £24 saved so far :T0 -
Pipes to bath are probably 22mm and chances are pipes to boiler are 15mm so water flows too quickly through boiler for it to heat up to a good temp.The world is over 4 billion years old and yet you somehow managed to exist at the same time as David Bowie0
-
you shoould ahve a water temp setting and a heating temp setting on the boiler check that the water one is in the marked zone, also check the pressure of the boiler (details in distruction manual)If it doesnt pay rent sell it.
Mortgage - £2,000
Updated - November 20120 -
on mine the Diverter valve is partially clogged with crud and heats to a maximum of 66C ....I have to turn down the water flow to achieve that at the best of time
on my list of jobs for the summerwhen the heating is not needed
Ex forum ambassador
Long term forum member0
This discussion has been closed.
Confirm your email address to Create Threads and Reply

Categories
- All Categories
- 352.1K Banking & Borrowing
- 253.6K Reduce Debt & Boost Income
- 454.2K Spending & Discounts
- 245.1K Work, Benefits & Business
- 600.7K Mortgages, Homes & Bills
- 177.5K Life & Family
- 258.9K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.1K Discuss & Feedback
- 37.6K Read-Only Boards