We’d like to remind Forumites to please avoid political debate on the Forum.

This is to keep it a safe and useful space for MoneySaving discussions. Threads that are – or become – political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.

📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

hiding terrible walls before painting

2»

Comments

  • misgrace
    misgrace Posts: 1,486 Forumite
    melb wrote: »
    lines are the spaces between the strips of lining paper. One thing I didn't really understand was why he did 3 walls vertical and 1 wall horizontal. I know 2 people who have had lining paper fitted recently and both times the decorator fitted it horizontally because he thought it was better and I must say you can't see their joins.


    You would normally line horizontal if you are hanging finish paper on top of it, because of the width of paper, as you dont want your finish paper butt joines to be on top of the lining paper butt joins.

    Was it by chance the window wall he lined horizontal?

    By rights, there should be no gaps between the paper, except for a very slight gap, but sometimes no matter how you have plumbed the wall, and its straight all the way, sometimes when you come to say the third or fourth drop on the wall, it can be out, specially if the wall has a slight curve, which then would make the gap slightly bigger.
    Or he just hasnt butted it enough, even so, it still could have been fixed, but if he taking the paper off, then let him do it again, he will probabaly get the joins perfect next time.:D
  • Personally I'd skim if I were you. Just finished doing the bathroom and the one wall that was papered shows every bump and lump so much so that I'm going to strip off the wallpaper and start again when I can get the plasterer back. It was always the worst wall in the house where you could see the joins of the plasterboard even with a good lining paper on and a good heavy finishing paper.

    The advantage of skimming means you can then just paint rather than wallpapering and change your colour scheme at will. Having said that I love the paper I chose for the bathroom so it will be going back.
  • rabialiones
    rabialiones Posts: 1,966 Forumite
    Part of the Furniture 1,000 Posts Combo Breaker
    can you use gloss paint over paper,just coz its easier to wipe clean when the little ones leave their grubby handprints all over.
    i find that normal matt or silk emulsion just comes off on the cloth when wiping over.
    or , i can remember years ago, painter in my mums house used a paint called permoglaze. this lasted for years, and was easily cleaned with a a cloth, they just got rid of it coz they were fed up with the bright colour.
    Nice to save.
  • TomsMom
    TomsMom Posts: 4,251 Forumite
    Part of the Furniture 1,000 Posts Combo Breaker
    can you use gloss paint over paper,just coz its easier to wipe clean when the little ones leave their grubby handprints all over.
    i find that normal matt or silk emulsion just comes off on the cloth when wiping over.
    or , i can remember years ago, painter in my mums house used a paint called permoglaze. this lasted for years, and was easily cleaned with a a cloth, they just got rid of it coz they were fed up with the bright colour.

    Have you seen the Dulux Endurance paints. Supposed to be washable and 10 x tougher than ordinary paint. That might suit as you have little ones, although I expect it's a fair bit more expensive.

    Crown also do an "Easyclean" paint, and Johnstones do a washable matt.

    We've got a whole house to decorate so I've got all the paint charts at the moment :rotfl: .
  • jamtart6
    jamtart6 Posts: 8,302 Forumite
    we're getting ours reskimmed, expensive but worth it IMHO :)

    :ABeing Thrifty Gifty again this year:A

  • longbaygirl
    longbaygirl Posts: 209 Forumite
    We have the same problem, but have old lathe and plaster walls, so once you try and take down the old paper, the whole wall collapses and you are just left with the little lathe? strips.

    Is there any (cheaper) alternative.
  • latecomer
    latecomer Posts: 4,331 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Combo Breaker
    If the plaster has come off then you're going to have to get it re-done. Might be better to remove all the lath and have it plasterboarded.

    Have you had quotes for getting it plastered?
  • longbaygirl
    longbaygirl Posts: 209 Forumite
    No - dreading the thought, but think you are right - no cheap shortcut.
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 352.4K Banking & Borrowing
  • 253.7K Reduce Debt & Boost Income
  • 454.4K Spending & Discounts
  • 245.5K Work, Benefits & Business
  • 601.3K Mortgages, Homes & Bills
  • 177.6K Life & Family
  • 259.4K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16K Discuss & Feedback
  • 37.7K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.