Ready, steady… save!
You don’t need a chart to join in. Here are 2 ways to record your savings:
1. Cross it off
Pop a chart into your first post. Saved an amount? Cross it out! Read more »
£0.01 £0.02 £0.03
2. Write it down
Skip the chart and add updates to your first post. Read more »
“Another +£3 saved today. Go me!”
Use +£ before each new saving so it counts towards your total.
We’d like to remind Forumites to please avoid political debate on the Forum.
This is to keep it a safe and useful space for MoneySaving discussions. Threads that are – or become – political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
BOOT diskette
Comments
-
You need to get into the BIOS and check if the Hard Drive is being picked up. This will be done by powering off the machine and hitting F1, F8, Del or some other such key while it is powering up (or try holding one down - it can cause a 'Keyboard Error' which causes the PC to trip into the BIOS)
If you cannot get into the BIOS - what make / model or PC is it and we may be able to tell you exactly how!
Worked that time! I have a big blue screen, what now?0 -
If you cannot get into the BIOS - what make / model or PC is it and we may be able to tell you exactly how!
MAX DATA NB MX Vision FX 4T0 -
Can't find your laptop model anywhere, oh well, onto the big blue screen.
Without knowing the layout of the screen you are looking at I can only try to guide you.
What you are looking at is the basic (low level) setup of your PC - basically - what it picks up as the power turns on.
In here somewhere will be a list of the Drives that it has found during power up. They normally include terms something like - 'Removable Drive', 'Floppy Drive', 'Fixed Disk 0' 'Hard Disk 0' etc.
What you are looking for is the 'Boot Sequence', or 'Boot Order' or 'Startup Sequence'. This may be buried in a menu called 'IDE Hard Drives' or something. This is the simply the order in which your PC will check the drives it has found for something it can load (preferably Windows). Included in this list should be your hard drive.
Anything like this anywhere? If not can you list the choices (sorry to make you do this)0 -
Big blue screen says
Standard CMOS Setup
Advanced CMOS setup
Power Management Setup
Peripheral Setup
Auto-Detect Hard Disks
Change User Password
Change Supervisor Password
Default Settings
Save Settings and Exit
Exit Without Saving
When I go into "Auto Detect Hard Disks" it brings up
Floppy Drive A and doesn't show any other drives!?
Any help now, PLEASE!? :'(0 -
When I go into "Auto Detect Hard Disks" it brings up
Floppy Drive A and doesn't show any other drives!?
Any help now, PLEASE!? :'(
How old is the laptop?
Check the model again - can't find a '4T' version .... 440T ... 450T - yes but not 4T :-(
1. As you've now discovered the BIOS is not finding the hard drive.
2. This could be as simple as the cable on the drive comming loose or a complete hard drive failure- you need to establish which!
I think you may have the worst case scenario :-/
But lets be optomistic
3. Go into 'Standard CMOS Setup'
You're going to have to set the 'Pri Master' values. Currently this should have a value of AUTO - u can switch it to USER with +/- keys. Selecting USER and hitting return might cause it to fill in the missing values. If that doesn't work we need the age and model number to be confirmed. If it found the drive hit 'Esc' and save the settings.
If it doesn't find it you should download the drive fitness test - not sure it'll find the drive if the bios fails but worth a shot.
Post your results.0 -
How old is the laptop?
Check the model again - can't find a '4T' version .... 440T ... 450T - yes but not 4T :-(
1. As you've now discovered the BIOS is not finding the hard drive.
2. This could be as simple as the cable on the drive comming loose or a complete hard drive failure- you need to establish which!
I think you may have the worst case scenario :-/
But lets be optomistic
3. Go into 'Standard CMOS Setup'
You're going to have to set the 'Pri Master' values. Currently this should have a value of AUTO - u can switch it to USER with +/- keys. Selecting USER and hitting return might cause it to fill in the missing values. If that doesn't work we need the age and model number to be confirmed. If it found the drive hit 'Esc' and save the settings.
If it doesn't find it you should download the drive fitness test - not sure it'll find the drive if the bios fails but worth a shot.
Post your results.
The laptop is 3 or 4 years old. Sorry model number is 460T. How do you "3. Go into 'Standard CMOS Setup", sorry I know nothing about computers? She never had her laptop on line but Mum found the cd for it last week so if I could get it working again I would link it to the internet for her, believe it or not I can do that much!!
0 -
Enter the bios as you have done. Navigate between the bios options using the arrow keys on the keyboard, change the items using the page up & page down keys.
My first suggestion on an Ami Bios would be to force a detection prior to entering information manually using the USER option as pointed out in the previous posting0 -
Sorry I don't have a clue about computers or how they work. I do not understand what you mean, could you please explain, sorry?! :-[0
-
Big blue screen says
Standard CMOS Setup
Advanced CMOS setup
Power Management Setup
Peripheral Setup
Auto-Detect Hard Disks
Change User Password
Change Supervisor Password
Default Settings
Save Settings and Exit
Exit Without Saving
When I go into "Auto Detect Hard Disks" it brings up
Floppy Drive A and doesn't show any other drives!?
Any help now, PLEASE!? :'(
You need to repeat this process, on the screen you will be able to toggle using the page up & page down keys to auto detect IDE devices, im just looking for the exact wordings..... ;D
Whilst im doing that, is THIS the specification of your sisters laptop0 -
It shows the time and date, base virus memory, extd memory, floppy drive a,. It shows that the following are "not installed" Pri Master, Pri Slave, Sec Master and Sec Slave. It shows "Boot Sector Virus Protection" Disabled. Hope that makes sense to you because it makes none to me.0
This discussion has been closed.
Categories
- All Categories
- 356K Banking & Borrowing
- 255K Reduce Debt & Boost Income
- 456.3K Spending & Discounts
- 248.5K Work, Benefits & Business
- 606.2K Mortgages, Homes & Bills
- 179.1K Life & Family
- 264.1K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.2K Discuss & Feedback
- 37.7K Read-Only Boards