Ready, steady… save!
You don’t need a chart to join in. Here are 2 ways to record your savings:
1. Cross it off
Pop a chart into your first post. Saved an amount? Cross it out! Read more »
£0.01 £0.02 £0.03
2. Write it down
Skip the chart and add updates to your first post. Read more »
“Another +£3 saved today. Go me!”
Use +£ before each new saving so it counts towards your total.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
Combi doesn't fire fast enough
benjdr
Posts: 219 Forumite
Afternoon,
I'm having an irritating problem where my Combi isn't firing up for lowish flow requests for hot water, but only from the shower.
I can turn the kitchen hot tap on only slightly, and get scolding water pretty quick. Same with the bathroom tap.
However, if I only put the shower on slightly, the boiler won't fire and only cold water will come through. I have a turn the shower up pretty high to get the boiler to fire up, by which time the flow rate of the shower water is too fast for the boiler to heat up sufficiently, resulting in cold/luke warm showers.
There's a mixer valve in the shower, which is fully set up for maximum temperature, as far as I know.
Any thoughts welcome!
I'm having an irritating problem where my Combi isn't firing up for lowish flow requests for hot water, but only from the shower.
I can turn the kitchen hot tap on only slightly, and get scolding water pretty quick. Same with the bathroom tap.
However, if I only put the shower on slightly, the boiler won't fire and only cold water will come through. I have a turn the shower up pretty high to get the boiler to fire up, by which time the flow rate of the shower water is too fast for the boiler to heat up sufficiently, resulting in cold/luke warm showers.
There's a mixer valve in the shower, which is fully set up for maximum temperature, as far as I know.
Any thoughts welcome!
0
Comments
-
Good afternoon: You might find a bit of help here Could also be fault with your shower mixer.
Have you managed to find a good RGI yet?;)
CanuckleheadAsk to see CIPHE (Chartered Institute of Plumbing & Heating Engineering)0 -
Thanks for the links.
I did have an inkling that it was going to be the mixer.
When I installed it, I remember setting the mixer to maximum temperature, and even putting the provided constrictor in the cold supply. We knew the boiler wasn't really good enough to begin with.
As for my search, I have a list of people to phone but am waiting till after the Christmas season!
CheersCanucklehead wrote: »Good afternoon: You might find a bit of help here Could also be fault with your shower mixer.
Have you managed to find a good RGI yet?;)
Canucklehead0 -
Is your shower thermostatic and has it ever worked ok?0
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 356K Banking & Borrowing
- 255K Reduce Debt & Boost Income
- 456.3K Spending & Discounts
- 248.5K Work, Benefits & Business
- 606.2K Mortgages, Homes & Bills
- 179.1K Life & Family
- 264K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.2K Discuss & Feedback
- 37.7K Read-Only Boards