Spots of rust on my oven hob!!

Hi everyone, I need some help please!!!

I have a separate oven and hob in my kitchen, on the top where the hob is all over the metal there is loads of spots of rust appeared:cry: , I'm guessing its come from where I have cleaned it and left some chemical behind?

Anyway, does anybody know how I can try and remove the rust without causing damage to the surface? I really don't want it staying there because it looks awful and I cant afford to replace it!

I have tried searching the forums and google and all I could find was to use a tar tar sauce or some form of acid which I cant remember what it was called.

Thanks for any help it will be really appreciated,

Gary

Comments

  • bump

    sorry, anybody any ideas?!
  • TomsMom
    TomsMom Posts: 4,251 Forumite
    Part of the Furniture 1,000 Posts Combo Breaker
    Is it stainless steel? The only thing I can think of is, if it is stainless steel, try Shiny Sinks. We had a S/S sink that developed rust spots years ago and had a visit from someone from Franke who suggested Shiny Sinks. It worked well and we used it on a fairly regular basis (although did use other cleaners on a daily basis).

    Once you've removed the rust spots I would try and find a cleaner that is not so harsh (or be extra careful about rinsing off and drying). Astonish do a general kitchen cleaner that is biodegradeable and has no harsh chemicals, it's in a tub and you use a damp sponge, rub over the cleaner and apply to whatever you're cleaning. Ideal World sell something similar I think. Also see if Ecover do something.

    Sorry, that's all I can think of.
  • I swear by Astonish! The stuffs fab! and Babyoil makes Stainless steel Appliances Shinyer...Makes em sparkle a treat!
    SHOPPING RULE: ONLY BUY WHAT YOU REALLY NEED
  • Thank you very much for your replies, I will have a look about and try and get one of them!!
  • Nicki
    Nicki Posts: 8,166 Forumite
    We have a metal grate which my DD sprayed with window cleaner and it rusted. Had no idea what the metal was but it was gray. We couldn't find any proprietary cleaners to solve this problem but the chap in the hardware shop suggested we try polishing it with a coloured T-Cut produce from a car repair shop. This as worked a treat. If the astonish doesn't work, maybe try that?
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 349.9K Banking & Borrowing
  • 252.7K Reduce Debt & Boost Income
  • 453K Spending & Discounts
  • 242.9K Work, Benefits & Business
  • 619.7K Mortgages, Homes & Bills
  • 176.4K Life & Family
  • 255.8K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 15.1K Coronavirus Support Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.