removing tile adhesive

Hi

I have just ripped out my old bathroom and need to work out how to get the surface smooth ready for tiling. I do have a photo but dont know how to embed it in this message. Anyone know how?

Cheers

Comments

  • Twobins_2
    Twobins_2 Posts: 42 Forumite
    If all you want to do is remove the old adhesive, use a wallpaper steamer and scraper. Its a long, messy job but it works and gives a smooth finish on which to lay the new tiles. If the wall is badly damaged it may need skimmed, or if it is a stud wall, just remove the plasterboard and reboard and tile.
  • keyboard
    keyboard Posts: 219 Forumite
    Many thanks for the tip..... I have also damaged some plaster badly in places. so badly the brick work is showing... so i guess i will need to put a coat of bonding on or dot and dab some plasterboard on and see if i can make it match the rest of the plasterwork.
  • andrew-b
    andrew-b Posts: 2,413 Forumite
    Part of the Furniture
    I've got a similar problem and currently nursing bruised hand after whacking it with club hammer :eek: after an argument with my walls!
    Think my walls will need a bit more than patching up:

    Image012.jpg

    Image011.jpg

    ...the red bits in last pic are flaky paint...all needs scraping off..and white/grey bits tile adhesive that was lurking beneath old wallpaper.
  • keyboard
    keyboard Posts: 219 Forumite
    Hi Andrew-b

    Yes we are at similar stages although u have more block work to plaster. Have u decided if u are going to put bonding on the block and then skim ?
    or just bonding or maybe aquaboard on top ?

    Also how did u embed the pics in your message i wanna do the same and share my pics ?

    Cheers
  • andrew-b
    andrew-b Posts: 2,413 Forumite
    Part of the Furniture
    Probably bonding plaster ...though i'll be getting a plasterer in to do it as i want a high quality finish as most of the walls will be painted rather than tiled.

    Initial plans were to put a bath with shower above into that recess as currently the room has only a shower. However because i have mobility probs i've discovered that getting in/out bath is much more difficult than i thought it would be (tested at relatives house) compared to the shower so we will be keeping the layout similar with shower and vanity unit in that recess. With the bath plan the costs were beginning to spiral beyond the budget because of the additional plumbing costs.

    To embed your photos you need to register with a free photo sharing website. I chose photobucket.com randomly as someone else here was using it. Once registered, upload your photos. Next to each photo in an album you'll see a link for pasting into forums (containing ... tags)..paste that into your message and your done.

    Andy
  • zerodashzero
    zerodashzero Posts: 183 Forumite
    Another tip (if you don't have a steamer) of to just dampen the stuff & scrape off. I used a plant mister / squirter & a sponge on the remains of my kitchen tiles - it's amazing how easily it comes off once it gets wet. Good luck!
  • andrew-b
    andrew-b Posts: 2,413 Forumite
    Part of the Furniture
    Yes though with steamer don't hold it on too long else you'll blow the plaster (been there done that!)

    Just dug out pictures of the kitchen renovation....i forgot just how much work went into the walls for that which were all covered in some brown card like backing paper.

    04-10-06_1408.jpg

    Wetting the surface wasn't an option for that as it just turned to a really sticky mess! It's always worth experimenting.
  • cheekyweegit
    cheekyweegit Posts: 1,197 Forumite
    Part of the Furniture 1,000 Posts Combo Breaker
    Hiya,

    When I was scraping the left over tile cement / lose paint from my bathroom walls I used a long handled scraper like this one on ebay

    http://cgi.ebay.co.uk/12-Long-Heavy-Duty-4-Paint-Wallpaper-scraper_W0QQitemZ160261556613QQcmdZViewItem?hash=item160261556613&_trksid=p3286.m14.l1318

    (not my auction by the way just wanted to show you an example).

    It was absolutely brilliant and did the job in no time. I got one from B&Q and another from Poundland of all places and you can get spare blades for them too which is a bonus.

    One warning though, don't do what my son did and fill your wheeliebin if you have one with the remenants of the plaster / cememt. My son kept emptying out bucket into the same wheelie bin until it was 3/4 full and wondered why the bin men wouldn't empty it :rolleyes: .

    1/4 full max if that's any help or stick it in double carrier bags and then take it to the tip directly.

    Hope this helps.
  • keyboard
    keyboard Posts: 219 Forumite
    hi guys

    thanks for your comments will remember the tip about dumping stuff in the bin only a 1/4 and scraping off stuff. I think im gonna pop down to poundland near and see what they have.

    Andrew thanks for the pics.

    Cheers
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 350K Banking & Borrowing
  • 252.7K Reduce Debt & Boost Income
  • 453.1K Spending & Discounts
  • 243K Work, Benefits & Business
  • 619.9K Mortgages, Homes & Bills
  • 176.4K Life & Family
  • 255.9K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 15.1K Coronavirus Support Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.